EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

ESP394 Caloric Range - Instructions

All Instructions for the ESP394
31 - 45 of 101

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Stove Burner wouldn't heat up
1 of 2 people found this instruction helpful.
  • Donna from Sandwich, MA
  • Really Easy
  • Less than 15 mins
Someone did the repair for me.
Was this helpful?
Thank you for voting!
Sockets burnt out.
1 of 2 people found this instruction helpful.
  • James from Bear, DE
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Repair was very east. The suppliers package had all of the necessary parts ceramic wire nuts wire Ect. Excellent.
Will buy from Part Select Appliance again.
Was this helpful?
Thank you for voting!
The Problem Was That The Plug Was Gone It Fell Down Out Of The Bracket
1 of 2 people found this instruction helpful.
  • Elnora from Brundidge, AL
  • Easy
  • 15 - 30 mins
  • Screw drivers
I took the old wires and plug off and replaced it with the new block it works fine
Was this helpful?
Thank you for voting!
Three of four electric coils won't turn on
1 of 2 people found this instruction helpful.
  • Arsenio from Beaverton, OR
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
I took out the coils manually by pulling them out with slight pressure. Then I lift the hood by first unscrewing the four screws. I have never done anything like this before just intuitive sense to locate the screws that needed to be loosened. Afterwards I remember placing something underneath like a piece of 2x4 wood block to act as supp ort to hold the hood open so I can work on the coils. The parts I got are exactly the same as those I am replacing so I just copied the connection and voila my electric range is working like new. Well of course before I touched anything, I made sure I turned off the main switch and that nobody switches it back on without my knowledge. Thanks for providing the parts, I just saved myself from buying a $600 electric range.
Was this helpful?
Thank you for voting!
Missing An Oven Rack Due To Plastic Fire In Our Oven. Plastic Melted Onto The Rack...Instead Of Taking The Time To Melt The Rest Off, My Husband Threw It Away =(
1 of 2 people found this instruction helpful.
  • Nicole from Rogers, MN
  • Really Easy
  • Less than 15 mins
Bought a new one. . Three years later =)
Was this helpful?
Thank you for voting!
drip-bowls wore out
1 of 2 people found this instruction helpful.
  • Ronald E from Rochester, NY
  • Really Easy
  • Less than 15 mins
i read the installation instructions and followed them. first i made sure that each heating element was off. next i carefully removed each one (a total of 4) from it's plug and lifted the worn out drip-bowl up and replaced it with the new one. finally i pluged in (a total of 4) heating elements and turned them on to make sure them were wo rking and they did.
Was this helpful?
Thank you for voting!
Simple - needed to replace the drip pans on the stove between tenants in a rental apartment
1 of 2 people found this instruction helpful.
  • Tama from Pacific Grove, CA
  • Really Easy
  • Less than 15 mins
This wasn't much of a repair -- rather a replacement of a simple abused part. At the same time, PartSelect allowed me to order what I needed after two failed attempts to buy replacements that would fit the range. I'll remember PartSelect if we need parts for other older appliances in the rental units.
Was this helpful?
Thank you for voting!
Replace oven racks
2 of 5 people found this instruction helpful.
  • Gregory from Davenport, IA
  • Really Easy
  • Less than 15 mins
Very simple process of just ensuring you have the correct size racks and remove the old racks and replace them with the new ones.
Having ordered a lot of things on the internet, I am very pleased with using Part select and would "highly" recommend them to all!!
Was this helpful?
Thank you for voting!
Old burner pan warped.burner sat at 15 degree angle.
1 of 2 people found this instruction helpful.
  • Michael from Portland, OR
  • Really Easy
  • Less than 15 mins
Removed burner and then burner pan.Then replaced pan and reinstalled burner.
Was this helpful?
Thank you for voting!
Wire Racks very old and very dirty
1 of 2 people found this instruction helpful.
  • Paul from Belmont, MA
  • Really Easy
  • Less than 15 mins
I just replaced the racks with beautiful, new, shiny racks. My wife was very pleased
Was this helpful?
Thank you for voting!
2 of the burners were not working arching and smoking
1 of 3 people found this instruction helpful.
  • Tina from Laurel, MT
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Time was do to the fact that I replaced two elements! I turned off the power to the braker box, unplugged the stove and removed the screw holding the element plug in, removed the part, and cut the wires where they were clean looking (not damaged by smoke or the arch) I then stripped the wire and took the new part and twisted the parts t ogether with the caps and then put the heat shrink on and used the blow dryer on them, attached the part to the bracket and screwed it to the hood of the stove plugged the burner in, plugged in the oven and turned on the power tested it worked, did the same for the next burner and yes mind you I am a woman it was very easy to do.
Was this helpful?
Thank you for voting!
broken hinge
1 of 3 people found this instruction helpful.
  • Jed from Spanish Fork, UT
  • Easy
  • 15 - 30 mins
  • Screw drivers
The repair was quite easy. Remove the two screws and put in the new part. The only problem I had was the hinge sent was the wrong side (but it still worked) and the new hinge had no threads for the screws. I had to tap the holes so that the screws could be used.
Was this helpful?
Thank you for voting!
replace coroded drip pans
1 of 3 people found this instruction helpful.
  • Marlin F. from Holbrook, AZ
  • Really Easy
  • Less than 15 mins
replaced the drip pans. Fit perfect. No problems
Was this helpful?
Thank you for voting!
hinge on oven door broke off
2 of 6 people found this instruction helpful.
  • Janine from Wilkes Barre, PA
  • Very Difficult
  • More than 2 hours
  • Screw drivers
After I received the new hinge in the mail, my 13 year old son volunteered, for a fee of five dollars, to put the new hinge on the oven door. Seeing "easy to install" on the outer wrapper of the new part, I thought I was being generous. However, my son soon let me know that the screws given with the new hinge did not fit into the predri lled holes of the oven. He tried and tried for over an hour to get those screws to fit. I decided to go to the home improvement store to buy bigger screws. I took the hinge with me and had the store employee assess the type of screws I would need. He then informed me that the screws were fine, but I needed the holes in the hinge to be drilled bigger. I bribed him by offering to buy him a drink if he'd do it for me as long as he was single. He laughed and drilled away. (Sometimes, single women, like me, get desperate!) He handed me the hinge with larger holes and I noticed the wedding ring. Oops...no drink for him!! But I did give him a great big thank you. Happily, I brought the fixed piece home and handed it to my son to continue with the repair. He tried again and this time announced the holes were drilled too big!! If there was a bridge nearby I seriously would have jumped! The next day I drove to my Dad's house...a true jack of all trades...and with his drill and two new screws, he said this should do it. For the third time, I handed the hinge to my son and VOILA!! It actually worked! Thanks Dad!! So much for "easy to install". Seriously, the incorrect screws were sent with this hinge! Anyway, I happily celebrated that night with a drink in my hand...minus the home improvement employee!
Was this helpful?
Thank you for voting!
Broken oven door hinges
0 of 1 people found this instruction helpful.
  • James from Brookline, MA
  • A Bit Difficult
  • More than 2 hours
  • Screw drivers
Ordered a left & right hinge. Paid considerably more for the left hinge but both hinges were identical when received.
Bolt holes in both hinges were not tapped for the bolts which were sent with the hinges. This required a trip to the hardstore to get a tap set. After the bolt holds were tapped there was no problem removing the old hinges and installing the new ones.
Was this helpful?
Thank you for voting!
All Instructions for the ESP394
31 - 45 of 101