ELT17538RDF Snapper Lawn Tractor - Parts

The Shoulder Bolt (size: 3/8 16 x 3/4) is a black, metal, individually sold part. It can be installed using a wrench or socket. This part is used to secure other parts in place. You'll know if it needs to be replaced if the part is coming loose. This means it is damaged, likely due to fatigue/wear/damage. Refer to your make, model and diagrams to ensure you're picking the right part.

Switch push button no/nc snap-in

Sourced directly from the original equipment manufacturer, this Spring Washer is used to spread the load under a bolt or nut. It has an I.D. of 0.475 inches, is made of metal, and is sold individually, not as part of a kit or assembly. If you notice any signs of corrosion, cupping, wear, or damage, you will need to replace the Spring Wa...Read moresher. Refer to your owner's manual to determine the exact location of this part on your model.

This 5/8 Washer is an OEM part that spreads load under a bolt or nut in a variety of different lawn equipment. This washer has an inside diameter of 0.625 inches, or 5/8. It is silver in color, made of metal, and sold individually. Over time, the washer may become damaged due to fatigue, and need to be replaced. Depending on the locatio...Read moren of the bolt or nut it is associated with, this repair may vary in difficulty, but generally it should be easy and not require any special tools.

This genuine OEM replacement part is sourced directly from original manufacturer for use with lawn mower and garden tractors. This bolt helps to secure the deck wheel which supports mower deck and allows it to move freely. This hex head bolt is sold individually and would require a wrench for installation.

This is an authentic part produced by original manufacturer. It is used in various tractors and lawn mowers built by Murray, Snapper, and Simplicity. Ball bearings mainly serve to hold and buffer moving parts, reducing friction. They also assist in keeping parts moving in the correct position. Therefore, they are high wear items with regular replacement needs. Sold individually.

This metal washer is a genuine OEM part that is commonly used on various lawn equipment and is typically used to secure and seal connected components. This washer is high-quality and is sold individually, so consult with the relevant diagrams for your model to correctly determine where this washer would be for your equipment, and whether you need one, or more.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This is a genuine replacement part manufactured for use with lawnmowers. Self-locking rings are designed to fix to a shaft without a groove to sit in. The ring can be pushed on, and is used in a variety of capacities. The self-locking ring is sold individually, please see model diagram for part location and use.

This is a genuine OEM authorized replacement part which is specially designed for use with Murray, Simplicity and Snapper lawn and garden equipment. It helps to secure components together, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality ring is made of durable metal and is sold individually.

This replacement fuel cap is a genuine OEM sourced item, not an aftermarket imitation. It is specially designed for use with Murray lawn tractors. It is used to keep the fuel in the tank. This fuel cap is made from durable black plastic and it is sold individually.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.