EIFLW55IRR0 Electrolux Washer - Parts

The door strike is used in washers and is attached to the door to activate the switch when the door is closed. This ensures that the washer door remains locked and closed. If your door does not stay open, or it gets stuck, replacing this part can solve the problem. This part comes in a gray color and is made from metal. This door strike i...Read mores a genuine replacement part. As a safety precaution remember to unplug your washer from the power source and wear work gloves before installing this part. Refer to the diagram provided by the manufacturer for more installation instructions and guidance.

This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Sold individually.

This is a bellow, though it may also be known as a door boot seal, and it is a part for your washing machine. The function of the bellow is to prevent leaks by forming a seal in between the wash tub and the door of the washing machine. The boot gasket measures to be almost 21 inches by 21 inches and is gray in color. Take caution, as this...Read more part is prone to tearing if the washer is frequently overloaded. To complete this repair, you will need a Phillips screwdriver, a number two square bit, and a pair of needle-nose pliers.

This washer shock absorber mounting pin is a small but essential fastener that secures the shock absorber to the outer tub of a front-load washing machine. By holding the shock absorber firmly in place, it helps stabilize the tub during wash and spin cycles, reducing excessive vibration, shaking, and movement. Made from durable materials ...Read moreand designed for a precise fit, the pin supports smooth operation and protects other components from stress caused by unbalanced motion. Replacing a worn, broken, or missing mounting pin can help restore proper vibration control, improve washer stability, and prevent noise or damage during operation.

This is a shoulder screw and is used in conjunction with multiple appliances within your home. This specific model is size 10, and it has 16 threads to an inch. This part is made entirely of metal and is chrome-colored. The shoulder screw measures to be less than an inch long, and has a flat bottom and top. In general screws are typically...Read more made of metal, and the purpose of them is to be used as a fastener when attaching one piece/part to another. This model is sold individually.

This water inlet valve works with washers

This part is the replacement screw for your washer. The head is approximately inch in diameter and the screw is approximately 3/4 inch in length. It is made of metal and is sold individually. This is an authentic OEM part sourced directly from the manufacturer.

This washer tub-to-pump hose, often called a coin trap or bellows hose, carries water from the outer tub to the drain pump during drain and spin cycles. Designed with an integrated trap, it captures coins, buttons, and other small debris to prevent damage to the pump. Made from durable black rubber or flexible plastic, it withstands high ...Read morewater pressure and constant vibration. Common signs of failure include leaks from underneath the washer, unusual noises, or drainage issues such as slow draining or error codes.

This door lock and switch assembly is a genuine OEM replacement for front-loading washing machines, designed to keep the door securely locked during operation and prevent leaks. It sends an electrical signal to the control board to confirm the door is closed, allowing the wash cycle to start and run safely. Built from durable plastic and ...Read moremetal components, the assembly measures approximately 6" x 4" x 1.75". Replace this part if the door won’t lock, the machine won’t start, or error codes related to door issues appear. Installation involves disconnecting power, removing the door boot seal spring, and unthreading mounting screws to swap the old assembly for the new one.

This outer door window, or outer lens, is found in your front-loading washer or dryer. Mounted to the door, it provides visibility and allows you to monitor the washing or drying process. It also acts as a barrier so that water or lint does not escape from the drum while the appliance is running. Signs of a broken outer door window includ...Read moree shattered areas, fogginess, or steam and water leakage from the door. To remove the window, refer to your user guide for instructions. Typically, you will need to open the dryer door, remove the hinge screws and lift the door upward to slide the "T" post on the hinge out of its slot. Then, unthread the screws on the inner door and near the metal strike and hinge center. You can then separate the inner door assembly from the outer door and lift out the inner door glass. Before making your purchase, bear in mind that this genuine OEM replacement part is sold separately from the rest of the door assembly.

This genuine OEM Frigidaire Bellows Spring Clamp provides secure placement for your washing machine's door boot, ensuring a tight, leak-free seal during operations. Compatible with select Frigidaire, Electrolux, White Westinghouse, and Tappan washers, it's precision-crafted for accuracy in fitting, despite possible minor variations in siz...Read moree or shape among similar parts. Please ensure your model aligns with this part before ordering. For safety, unplug your washer and wear protective gloves during installation as this part is spring-held. Enhance the longevity of your washing machine with this essential, authentic Frigidaire component. Valuing your washer's efficiency and performance starts with choosing the right parts.