This fuse, also known as a cartridge fuse, is a genuine OEM replacement part for microwaves. It has a glass cylindrical body with a metal cap on each end. The cap connects the fuse to the circuit. If the current goes above the fuse rating, the element inside the glass will melt and cut off the electrical current to the appliance. This pro...Read moretects the circuit and surrounding components from overheating and becoming damaged. Once the fuse is blown, the appliance will likely not operate at all, however, the fuse is designed to be easily replaceable. It is recommended to use insulated gloves and to avoid touching any exposed wiring connections. To replace the fuse, use a fuse puller to grip the metal caps and lift it out of the holder. Place the new fuse in the holder and ensure it is properly seated. Turn the appliance back on and check that the circuit is functioning.
This OEM waveguide cover in your microwave is a heat-resistant component that prevents food, grease, and moisture from entering the waveguide. It is typically located on the side or top wall of the cooking chamber. If the cover is broken, you may notice cracks, charring, or burns, and potentially see arcing or sparks during operation. Not...Read more replacing a damaged cover can lead to short circuits and the risk of electrical components touching your food. To remove the cover, start by disconnecting the microwave from its power source before opening its door. The waveguide cover is slotted or snapped into place, so gently slide or apply pressure to release it from the clips or slots. Please note that the cover is sold individually.
This door switch is designed for use with various makes and models of microwaves and is a genuine OEM part. This individually sold switch connects to the frame of the microwave through the door switch holder, which will need to be removed completely in order to replace this switch. If your microwave will not start, displays error codes, o...Read morer if the door will not shut properly and the inner light stays on, the switch could have broken from use and is in need of replacement. Due to the high voltage used within the components of microwaves, take extra caution when repairing your microwave. To replace the door switch in your microwave, disconnect the microwave from the power, and use a flat-head screwdriver to gain access to the switch through the main control panel.
This is a genuine Frigidaire Microwave Interlock Switch. It is a door switch that functions to prevent the microwave from starting when the door is open, ensuring your safety. It is designed to be Normally Open and is suitable for both top and bottom placement. This part is a perfect fit for various models of Frigidaire, White Westinghous...Read moree, Electrolux, and Tappan microwaves. As the microwave shielding and interlock switches need proper testing after the replacement, it's recommended that a service technician install this part. Boost your appliance's performance and longevity with this essential OEM part from Frigidaire.
This adapter is a replacement connection component designed to join or transition between different system elements. It supports proper flow or connection stability and is commonly replaced when cracked, leaking, or damaged.
Introducing the dependable Frigidaire COUPLER, a genuine OEM part designed to enhance the functionality of your microwave. This vital component is suited to various models from Frigidaire, Electrolux, White Westinghouse, and Tappan. The primary function of this turntable motor coupler is to establish an essential connection between the tu...Read morerntable motor and the tray, enabling the tray's rotation. Prior to installation, ensure to disconnect the device from its power source. With the Frigidaire COUPLER, you can ensure absolute precision and optimum performance of your microwave. Please confirm the compatibility of the part with your model for the best results.
This Frigidaire TRAY,TURN TABLE,GLASS is a genuine OEM part compatible with select models of Frigidaire, Electrolux, White Westinghouse, and Tappan microwaves. Serving a vital role in the function of your microwave, it allows for efficient cooking by rotating in the center of the appliance, ensuring your food cooks evenly. Remember to con...Read moresult your microwave's owner manual for installation guidance. Despite the similarities in appearance, keep in mind that parts might differ in size and shape. Make sure to confirm the compatibility with your appliance model before purchase. Trust in Frigidaire for quality and reliability in appliance parts.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian - For model number EI30BM60MSB
February 16, 2020
The display in the door doesn’t work when i close the door, it only shows the display when the door is halfway open, help?
Hello, Thank you for your question. You will need to check the display board, and the door switches. That is typically the issue. We hope this helps.
Was this helpful?
Thank you for voting!
Sandra - For model number EI30BM60MSB
June 27, 2021
It says close door after door is closed. How do I fix this?
Hello Sandra, Thank you for the question. Normally this indicates one or more of the Three Door Switches are defective and will need to be replaced. You can test each switch for continuity with a multi meter to determine what part needs to be replaced. Thank you for your inquiry, good luck with this repair!
The microwave is built in. The light is out. Can it be replaced without a repairman.
Hello Mary, thank you for writing. As long as he has access to the underside, it should be able to be changed out. The Bulb part number PS5136236. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
I need a control door for a E130BM60MSB or the serial cable?
Hello Greg, thank you for your inquiry. The serial cable is not sold separately and is only sold as part of the door assembly, so you need to replace the whole door assembly, part number PS11726495. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Cooking time runs rapidly..fast as you can count..nothing cooks
Hi Marie, thank you for the question. Based on our understanding of the issue, we would suggest you checking the control board, part number PS11726497, to fix the issue. Good luck with your repair!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave tripped circuit breaker when turned on
40 of 67 peoplefound this instruction helpful.
Arthur from LUTZ, FL
Easy
15 - 30 mins
Screw drivers
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
Was this helpful?
Thank you for voting!
Power would not come on, would trip breaker when connected.
18 of 28 peoplefound this instruction helpful.
JOSEPH from MIAMI, FL
Easy
15 - 30 mins
Screw drivers
First thing I dir was search YouTube for any related videos and found this one https://www.youtube.com/watch?v=uHj4H9Fdxrc, it was the exact problem my microwave was exhibiting. Once I verified the problem by troubleshooting, I removed the part and verified that the switches were working fine, the door latch assembly showed signs of wear
... Read morewhich was the cause of the problem. After receiving the replacement part I installed it, verified that power was restored to the unit and reassembled the microwave, works fine, hope it lasts a long time!
Read less
Was this helpful?
Thank you for voting!
Pressing the start, microwave will start and dies out. Electric is tripping.
11 of 18 peoplefound this instruction helpful.
ARNEL from WAUKEGAN, IL
Easy
15 - 30 mins
Screw drivers
The diagnosis is about an hour. Coz, I need to open the control panel, got a tester, and trsted all critical parts inside the panel. Also, replaced the fuse just to make sure its a new one. Found out it was a switch (bottom part) that control the open/close of the microwave door.
When found out the problem, the rest of t
... Read morehe work is easy.
My Orders
