EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

EHT-312 Caloric Range - Instructions

All Instructions for the EHT-312
31 - 45 of 67

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
I snapped a bolt on the main power terminal block when connecting the pigtail.
3 of 8 people found this instruction helpful.
  • Frank from Palm Coast, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Removed the small metal panel covering the main power terminal in back of the electric range. Removed the nuts holding the red, white and black electrical wires from the range using the appropriate socket (there will be two nuts on each bolt end). Removed the two screws holding the main power terminal block with appropriate screw driver. Connect the new main power terminal block to the range using the two screws. Reconnect the red, black and white electrical wires coming from the range using one nut for each wire. IMPORTANT: do no over tighten the nuts because the bolts could snap. Reconnect the pigtail and secure the small metal panel covering the main power panel.
Was this helpful?
Thank you for voting!
broiler pan missing
1 of 2 people found this instruction helpful.
  • RAYMOND from JACKSONVILLE, FL
  • Really Easy
  • Less than 15 mins
ordered new broiler pan
Was this helpful?
Thank you for voting!
Block broke
1 of 4 people found this instruction helpful.
  • Edward from Crimora, VA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Unplug power cord, remove wires from block. take 2 screws out. replace with new block about 15 mins. Done
Was this helpful?
Thank you for voting!
Bowl -Drip and gasket
0 of 1 people found this instruction helpful.
  • Walid from Worcester, MA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
it was relay easy when you get the right pats .so
Thanks for .
PART Select.
Best regard .
Walid
Was this helpful?
Thank you for voting!
circuit breaker blew
  • Richard from Sarasota, FL
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I went to the source of power on the stove and noticed one of the terminals had come loose from the terminal block and had shorted out against the cover of the terminal junction. After prying the loose terminal off cover I ordered new terminal block and received it the 2nd day. I removed the old terminal block and replaced the part in abo ut 10 minutes..Thank you Parts Select for your easy to find diagrams and quick delivery.
Was this helpful?
Thank you for voting!
needed a new drip bowl and couldn't find ons that fit exactly but you had it
  • Elsie from Garner, NC
  • Really Easy
  • Less than 15 mins
I removed the old one and put in the new one. Works great!!!!!!!!!!!!
Was this helpful?
Thank you for voting!
To Old Needed To Be Replace
  • ROSARIO from MESQUITE, TX
  • Really Easy
  • Less than 15 mins
Actualy I just removed the old ones and replace them with the new ones . And thank you for your prompt delivery I found some one I can trust . Thanks again . Mrs bolanos
Was this helpful?
Thank you for voting!
rusty pans
  • Stewart from Hanover, PA
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
simply remove the old and install the new; perfit fit
Was this helpful?
Thank you for voting!
I needed to replace my burner pans.
  • Robert from Wilton, CA
  • Really Easy
  • Less than 15 mins
The Drip Pans are a cinch to replace with no tools necessary. The best part is that the Web Site is extremely easy to use, and the parts arrived two days after being ordered.
Was this helpful?
Thank you for voting!
drip pan were burnt out
  • Delroy from Miramar, FL
  • Really Easy
  • Less than 15 mins
simply remove the burner take out the drip pan and bowl individually. Install the new one and replace the burner. no tool was used.
Was this helpful?
Thank you for voting!
Original Burner always loose from support
  • William from Mint Hill, NC
  • Really Easy
  • Less than 15 mins
For YEARS we put up with the old burner coming loose from support after cleaning. When one burner began to be intermittant, we purchased a replacement from Parts Select. Perfect fit AND much better made as the support and burner are held together in more places. We quickly purchased another to replace the other 8 in burner that had same problem but was working fine. New burners work and fit great.
Was this helpful?
Thank you for voting!
Drip bowls were all rusted.
  • Robin from Seneca, SC
  • Really Easy
  • Less than 15 mins
Removed old rusted drip bowls and put in the new ones. Very easy to do and needed no tools. It made my 25 plus Jenn Air look new again!
Was this helpful?
Thank you for voting!
My burner element had broken.
  • Mary from Hastings, FL
  • Really Easy
  • Less than 15 mins
I ordere the new burner element. It arrived quickly compared to some of the things I order. I removed the broken burner element and plugged in the new one and that was all that was needed. It feels pretty good to have that burner working properly again.
Was this helpful?
Thank you for voting!
old drip bowl was worn out
  • Richard from Germantown, MD
  • Really Easy
  • Less than 15 mins
new drip bowl fit perfectly and was a snap to install.
Was this helpful?
Thank you for voting!
replace the cook stove's drip bowls instead of cleaning them
  • Dallas from Arlington, TX
  • Really Easy
  • Less than 15 mins
I removed the burners and then the older drip bowls of the cook stove--and then I put on the new drip bowls and put back on the burners. My mechanical skills were sufficient for the replacement of the drip bowls.
Was this helpful?
Thank you for voting!
All Instructions for the EHT-312
31 - 45 of 67