EHD363 Caloric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The old drip bowls were rusting, no chrome left
3 of 7 people
found this instruction helpful.
-
kathryn from piqua, OH
- Really Easy
- Less than 15 mins
Took the old ones out and put in the new ones! What I am so pleased about it that I just went online and at Parts Select website it was easy to find what I needed, a fair price and the 4 bowls arrived within 2 days!
Other Parts Used:
Was this helpful?
Thank you for voting!
Drip Pans were stained and burned on.
1 person
found this instruction helpful.
-
Sandra Collignon from SANTA CLAUS, IN
- Really Easy
- 30 - 60 mins
Replaced drip pan. Notch did not want to match the burner notch. Was a close fit bit with a little pressure made it work.
Was this helpful?
Thank you for voting!
ELECTRIC BURNER SUPPORT FELL OFF AND BURNER SOMETIMES WOULD NOT COME ON.
1 person
found this instruction helpful.
-
RICHARD from SHOW LOW, AZ
- Very Easy
- Less than 15 mins
Stuck the new one into the plugin.
Was this helpful?
Thank you for voting!
N/A
1 person
found this instruction helpful.
-
Gerry from Mackay, ID
- Really Easy
- 15 - 30 mins
-
Screw drivers
I followed the instructions provided.
Was this helpful?
Thank you for voting!
The Problem Was That The Plug Was Gone It Fell Down Out Of The Bracket
1 of 2 people
found this instruction helpful.
-
Elnora from Brundidge, AL
- Easy
- 15 - 30 mins
-
Screw drivers
I took the old wires and plug off and replaced it with the new block it works fine
Was this helpful?
Thank you for voting!
Sockets burnt out.
1 of 2 people
found this instruction helpful.
-
James from Bear, DE
- Really Easy
- 15 - 30 mins
-
Screw drivers
Repair was very east. The suppliers package had all of the necessary parts ceramic wire nuts wire Ect. Excellent.
Will buy from Part Select Appliance again.
Will buy from Part Select Appliance again.
Was this helpful?
Thank you for voting!
Stove Burner wouldn't heat up
1 of 2 people
found this instruction helpful.
-
Donna from Sandwich, MA
- Really Easy
- Less than 15 mins
Someone did the repair for me.
Was this helpful?
Thank you for voting!
I snapped a bolt on the main power terminal block when connecting the pigtail.
3 of 8 people
found this instruction helpful.
-
Frank from Palm Coast, FL
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Removed the small metal panel covering the main power terminal in back of the electric range. Removed the nuts holding the red, white and black electrical wires from the range using the appropriate socket (there will be two nuts on each bolt end). Removed the two screws holding the main power terminal block with appropriate screw driver.
... Read more
Connect the new main power terminal block to the range using the two screws. Reconnect the red, black and white electrical wires coming from the range using one nut for each wire. IMPORTANT: do no over tighten the nuts because the bolts could snap. Reconnect the pigtail and secure the small metal panel covering the main power panel.
Read less
Was this helpful?
Thank you for voting!
wire came loose and shorted out
1 of 2 people
found this instruction helpful.
-
Elizabeth from HOUSTON, TX
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Ordering the part online was easy. It arrived in a timely manner. I found a terrific video online showing how to install the terminal. It was so easy. Thank you for the great instructional video.
Was this helpful?
Thank you for voting!
Three of four electric coils won't turn on
1 of 2 people
found this instruction helpful.
-
Arsenio from Beaverton, OR
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
I took out the coils manually by pulling them out with slight pressure. Then I lift the hood by first unscrewing the four screws. I have never done anything like this before just intuitive sense to locate the screws that needed to be loosened. Afterwards I remember placing something underneath like a piece of 2x4 wood block to act as supp
... Read more
ort to hold the hood open so I can work on the coils. The parts I got are exactly the same as those I am replacing so I just copied the connection and voila my electric range is working like new. Well of course before I touched anything, I made sure I turned off the main switch and that nobody switches it back on without my knowledge. Thanks for providing the parts, I just saved myself from buying a $600 electric range.
Read less
Was this helpful?
Thank you for voting!
Large burner on stove not working
1 of 2 people
found this instruction helpful.
-
Cherie from Dowagiac, MI
- Really Easy
- Less than 15 mins
I removed the heating element and noticed that the prongs were corroded. I looked for a model number but couldn't find it so it made it difficult to find a replacement until I got on this website. I found the replacement part and also found that as I checked for other sites for this part this company was the most resonable priced.
T ... Read more he part arrived and I replaced it in seconds. Turned it on and it worked immediately. Super easy.
T ... Read more he part arrived and I replaced it in seconds. Turned it on and it worked immediately. Super easy.
Read less
Was this helpful?
Thank you for voting!
My drip pans were in bad shape
2 of 5 people
found this instruction helpful.
-
Sandra from Oldsmar, FL
- Really Easy
- Less than 15 mins
I removed the old and repaced with new. I never ordered anything one day and got it the next. I'm impressed
Other Parts Used:
Was this helpful?
Thank you for voting!
broiler pan missing
1 of 2 people
found this instruction helpful.
-
RAYMOND from JACKSONVILLE, FL
- Really Easy
- Less than 15 mins
ordered new broiler pan
Was this helpful?
Thank you for voting!
Drip pans needed to be replaced
1 of 2 people
found this instruction helpful.
-
Mark from ROSENBERG, TX
- Very Easy
- Less than 15 mins
1) removed heating elements. 2) removed drip pans. 3) installed new drip pans. 4) reinstalled heating elements
Other Parts Used:
Was this helpful?
Thank you for voting!
Element had burned out
1 of 2 people
found this instruction helpful.
-
Judith from Star, ID
- Really Easy
- Less than 15 mins
Package arrived while I was working at the computer and my husband announced minutes later, "That's what I like to see". I didn't know what he was talking about until he tossed the packing list on my desk and said, "It works perfectly. Good Job!" It had only taken a minute to pop the new parts in and he already had water on for coffee.
Other Parts Used:
Was this helpful?
Thank you for voting!