Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EHD112 > Parts

EHD112 Caloric Range - Parts

All parts for the Caloric Range EHD112

Below is a list of all parts for the Caloric Range EHD112 - Electric. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the EHD112
1-14 of 82
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.17

Chrome Drip Bowl - 8"

This drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements, and catches drips and spills from the cookwar...

$11.12

Surface Burner Plug-In Block Kit

The surface burner plug-in block kit features a newer-style terminal block. This kit is designed for use with ranges and cooktops. This terminal block is how the coil element on your stove connects to the inner wiring of your appliance. Without this connection your burner element would not get the electrical current it needs to heat up. When your element will not heat at all, or if it is not heating properly it is likely an issue with the terminal block. You need to remove the element to replace this part. While you have the element out, inspect the element and the terminal for any corrosion, arcing, or discoloration. If you notice any damage to the element or the terminals we recommend you replace this part as well. This kit includes two metal brackets, two pre-crimped high-temperature wire leads, two ceramic wire nuts, two heat-shrinking insulators, and a mounting screw. Before you begin this repair, make sure you have unplugged your appliance.

$39.22

Economy Y-frame Surface Unit - 8"

This electric range economy Y-frame surface element measures eight inches and has five turns. It carries 2100 watts and is used on some electric ranges. The center medallion is chr...

$50.68

Broil Element (16" long x 8.5" wide)

This broil element, also known as an electric oven broil element, is used in ovens. Located on the roof of your oven, the element provides and supplies the heat needed for the broil function. It is 8 1/2 inches wide and 16 inches long with 1 3/8 inch deep terminals. The tool needed for this installation is a screwdriver. As a safety precaution, make sure to unplug the oven or range from the power source before installing this part. Remember to wear gloves to protect your hands. Refer to the installation instructions provided by the manufacturer for further guidance.

$6.18

TUCHUP

SPRING CLIP

SPRING, OVEN DOOR, L.

BACKGUARD FRAME (20")

SUPPORT, BACKGUARD, R.H.

DISCONTINUED

ALMOND (2)

USE MAC 00206900

LINER OVEN DOOR

DISCONTINUED

All Parts for the EHD112
1-14 of 82