My Orders
- Home
- EH155FXTQ01
- Instructions
EH155FXTQ01 Whirlpool Freezer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
light switch metal was corroaded by the moisture. there was no contact so light wouldnot turn on.
7 of 10 people
found this instruction helpful.
-
Henry from Monrovia, CA
- Easy
- Less than 15 mins
-
Pliers
pulled switch from door ,unpluged it and then plued in new switch.
Was this helpful?
Thank you for voting!
Overload was open
4 of 8 people
found this instruction helpful.
-
richard from galena, KS
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers
New part was similar, except contact blade was for a full 1/4", my model utilizes 1/8". So I cut the blade in half with a hacksaw, filed off the rough edges and reassemblied the connector; attached it to the compressor
Now being a retired electronic engineer; who's great idea was it to hide a klixon inside the connector?
Now being a retired electronic engineer; who's great idea was it to hide a klixon inside the connector?
Was this helpful?
Thank you for voting!
Both outside door handles turned very beige
23 of 76 people
found this instruction helpful.
-
Howard from Boynton Beach, FL
- Easy
- 30 - 60 mins
-
Nutdriver
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol
... Read more
oring refer handles. Thank you
Read less
Was this helpful?
Thank you for voting!