EFME617STT0 Electrolux Dryer - Parts

This high limit thermostat is used in a dryer and monitors the temperature to make sure it does not exceed 260 degrees Fahrenheit. When your dryer temperature reaches 260 it will cut it out and only comes back when it drops by at least 70 degrees Fahrenheit. If your dryer is overheating, taking too long to dry clothes, or is not producing...Read more enough heat, replacing the thermostat could be the solution to your problem. The tools needed for this part are a Phillips screwdriver, putty knife, and needle nose pliers. Refer to the manual provided by the manufacturer for installation instructions and guidance.

This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.

This dryer belt is one of the most important parts in a dryer and is what allows the dryer drum to spin/rotate. If the dryer belt is damaged or broken, the drum will not spin or will have difficulty in doing so, and your clothes will still be damp after a cycle as a result. This belt is made of durable material and can wear down over time...Read more and extended use of the dryer. Replacing a dryer belt will require some disassembly of your dryer, so a screwdriver and wrench will be needed to access and replace it. This belt is an individual OEM part.

Sold individually.

This lint screen is for dryers. The lint screen traps lint and debris from the exhaust air flowing from the dryer.

Discover the quality and reliability of genuine Frigidaire parts with this Thermal Limiter. Specially designed to protect from overheating, this non-resetable thermal fuse shuts off your dryer's heater if an overheating scenario occurs. A perfect fit for some models of Frigidaire, Electrolux, White Westinghouse, and Tappan, we encourage y...Read moreou to ensure this part fits your model appropriately, as size and shape can slightly vary. Prioritize safety by unplugging your dryer and wearing work gloves during installation. Elevate the performance of your Frigidaire appliance with this trusted, high-quality part.

This replacement drum support roller helps keep your dryer drum turning smoothly and quietly during operation. Designed for reliable performance, it supports the drum as it rotates to help reduce excess noise, vibration, and wear. Replacing a worn roller can help restore proper drum movement and improve dryer performance. For installation...Read more, unplug the dryer, access the drum support area, and replace the old roller with the new component. Always wear work gloves for added safety during repairs.

This dryer thermal fuse is a critical safety component designed to protect the appliance from overheating. It automatically shuts off power to the motor or heating system if excessive temperatures are detected, helping prevent damage or potential fire hazards. Once the fuse is triggered, it cannot be reset and must be replaced. A faulty t...Read morehermal fuse may cause the dryer not to start, run without heat, shut off prematurely, or operate at unsafe temperatures. Replacing this component helps restore safe and proper dryer operation.

This drive motor includes the pulley for the dryer drum belt. The motor has reverse threads for the blower wheel. Please disconnect the power before starting your repair. This is a genuine OEM part.

This dryer rear air duct is designed to channel heated air from the burner or heating element into the drum and guide moisture- and lint-laden air toward the exhaust, ensuring optimal airflow and drying performance. Constructed from durable metal to withstand high temperatures, it measures approximately 34.6 inches in length and 3.8 inche...Read mores in height and includes mounting points for internal components such as thermostats. Installation is straightforward—remove the damaged duct and secure the new one in place. Replacing a worn or damaged duct helps prevent overheating, improve drying efficiency, and eliminate issues like lint bypassing filters or marks on clothing.

This element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer.

Keep your cooking experience as smooth as always with our authentic OEM Whirlpool Cooktop. This replacement part is the perfect solution to getting your stove back in top shape, ensuring your meals are always cooked evenly and efficiently. It?s designed to perfectly fit various models across different brands including, Whirlpool, Kitche...Read morenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. However, we also remind you that even though parts often look the same, they can have slight variations in size and shape. For the best fit and smooth operation, please double check that your model number matches before placing an order through our website. With the Whirlpool Cooktop, you?re not just replacing a part?you?re enhancing your entire cooking experience. This significant upgrade provides your appliance with the consistency and reliability that you need for stress-free cooking. So, go ahead and trust the Whirlpool name for all your appliance replacement part needs. You'll have peace of mind knowing you're using genuine parts engineered to work perfectly with your appliances. Let us help you keep your kitchen running smoothly and your meals tasting great.