Models > EFME617STT0

EFME617STT0 Electrolux Dryer - Overview

Sections of the EFME617STT0

[Viewing 6 of 6]

Manuals & Care Guides for EFME617STT0

Click to download
Keep searches simple, eg. "belt" or "pump".
High Limit Thermostat – Part Number: 3204267
High Limit Thermostat
★★★★★
★★★★★
(2)
PartSelect #: PS446428
Manufacturer #: 3204267
This high limit thermostat is used in a dryer and monitors the temperature to make sure it does not exceed 260 degrees Fahrenheit. When your dryer temperature reaches 260 it will cut it out and only c...
$53.14
  In Stock
Screw – Part Number: 131302800
Screw
PartSelect #: PS417463
Manufacturer #: 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$11.22
  In Stock
SCREW – Part Number: 131168200
SCREW
PartSelect #: PS417085
Manufacturer #: 131168200
Sold individually.
$11.76
  In Stock
Lint Filter – Part Number: 5304511512
Lint Filter
★★★★★
★★★★★
(6)
PartSelect #: PS12114610
Manufacturer #: 5304511512
This lint screen is for dryers. The lint screen traps lint and debris from the exhaust air flowing from the dryer.
$70.52
  In Stock
Belt – Part Number: 134719300
Belt
★★★★★
★★★★★
(3)
PartSelect #: PS2349294
Manufacturer #: 134719300
This dryer belt is one of the most important parts in a dryer and is what allows the dryer drum to spin/rotate. If the dryer belt is damaged or broken, the drum will not spin or will have difficulty i...
$57.88
  In Stock
Dryer Drum Roller Kit – Part Number: 5304523155
Dryer Drum Roller Kit
PartSelect #: PS12746506
Manufacturer #: 5304523155
This is a genuine replacement drum roller for a dryer. This part includes a roller which has an axle and two tri-rings. The dryer drum roller holds the drum in place while it rotates on the dryer supp...
$62.88
  In Stock
Thermal Fuse – Part Number: 137032600
Thermal Fuse
★★★★★
★★★★★
(2)
PartSelect #: PS2349395
Manufacturer #: 137032600
$16.81
  In Stock
Thermal Fuse – Part Number: 134711401
Thermal Fuse
★★★★★
★★★★★
(3)
PartSelect #: PS4704883
Manufacturer #: 134711401
$21.73
  In Stock
Air Duct – Part Number: 5304508449
Air Duct
★★★★★
★★★★★
(2)
PartSelect #: PS11775712
Manufacturer #: 5304508449
$89.83
  In Stock
Heating Element Assembly – Part Number: 137114000
Heating Element Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS2367792
Manufacturer #: 137114000
This element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is u...
$210.11
  In Stock
MOTOR – Part Number: 5304529782
MOTOR
PartSelect #: PS16620747
Manufacturer #: 5304529782
This drive motor includes the pulley for the dryer drum belt. The motor has reverse threads for the blower wheel. Please disconnect the power before starting your repair. This is a genuine OEM part.
$193.78
  In Stock
Idler Arm Spring – Part Number: 131601000
Idler Arm Spring
★★★★★
★★★★★
(1)
PartSelect #: PS418263
Manufacturer #: 131601000
$43.73
  In Stock

Questions And Answers for EFME617STT0

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

6 questions answered by our experts.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marty
December 28, 2022
I need a new latch for the dryer pedestal.
For model number EFME617STT0
PartSelect logo
Hi Marty, Thank you for your question. The part number listed under your model number for the pedestal latch is PS2349356. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Beto
March 29, 2023
Need part number for heaters kit
For model number EFME617STT0
PartSelect logo
Hi Beto, thank you for reaching out. The heating element assembly compatible with your model is part number PS2367792. We hope that helps!

Was this helpful?
Thank you for voting!
Related Parts:
Mike
May 14, 2023
The dryer makes loud touring noise and motor vibres when running it still drys and works properly
For model number EFME617STT0
PartSelect logo
Hi Mike, thank you for contacting us. Based on the description that you have provided, the issue seems to be with the drive motor, part number PS16620747, which might be causing this issue. We advise you to check that the motor and drive belt is properly installed. We hope this sorts out your problem!

Was this helpful?
Thank you for voting!
Related Parts:
Stacy
October 23, 2023
My dryer starts then stops after 5 to 8 seconds. No codes displayed, and not feeling any heat. I made sure the dryer vent and house exhaust vent were clear. Also made sure the dryer hose was clear and not kinked. What could possibly cause this start and then stop issue?
For model number EFME617STT0
PartSelect logo
Hi Stacy, thank you for contacting us. Based on the description that you have provided, we would suggest checking the high limit thermostat, part number PS8691862, as it is most likely faulty and may need to be replaced. Let us know if you have further questions!

Was this helpful?
Thank you for voting!
Related Parts:
Fred
December 10, 2023
I have an Electrolux dryer stuck in pause mode,,, (pause light keeps flashing). I have an error code: E hd. Please help
For model number EFME617STT0
PartSelect logo
Hello Fred, thank you for contacting us. Based on our research, we would recommend checking the control board, part number PS11766140, to solve the problem. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2

Common Symptoms of the EFME617STT0

[Viewing 4 of 4]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Too hot
Fixed by
these parts
Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Noisy Dryer
When I described the noise to a YouTube appliance diagnostician, I was directed to check the felt seals front and back of the rotating drum for wear, tears, or foreign objects. As it happens the felt seals looked find and there were foreign objects so, not wanting to disassemble and reassemble the dryer more than I had, I ended up replacing all the replaceable moving parts that I considered possible culprits: The idler tension spring, the idler tension bracket (which includes a nylon pulley wheel), the drum belt, the five rubber-tipped bearings that support the drum and keep it in place, and the foam seal on the blower housing which seemed a little brittle and old, as well as high-temperature adhesive for the latter. The instructional videos here and on YouTube were extremely helpful (I doubt that I would have attempted this job at all, had I not watched these ahead of time). The most time-consuming aspect was waiting for the arrival of the parts as I didn't order them all at the same time or all from the same place (I ordered from whomever could ship me a given part the fastest. Disassembly took less than an hour. Re-assembly with the new parts in place took about the same but was a little more awkward because this appliance sits in a very narrow closet and it's difficult to ensure that the 4" flexible duct stays in place when sliding the appliance back into the closet. No regrets. Now I know the basics if this dryer needs attention in future and I also know all the parts that I can eliminate as suspects in any future maintenance (the parts that I replaced)
Parts Used:
Belt Dryer Drum Roller Kit
  • Philip from Oakland, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
45 of 53 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Internal vent inside the drum was coated in black (plastics from use)
1. Loosened the 3 screws inside of the drum
2. Removed the entire back of the dryer (lots of screws)
3. Removed the old vent (there are 2 screws at the bottom that hold it in)
4. Install new vent (put the screws back in)
5. Close up back and proceed to put all of the screws back
Parts Used:
Air Duct
  • Rich from New Albany, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cloths not drying
Removed the back panel and the exhaust hose.removed the heater element and changed the thermostat wire was melted cut damaged part of wire soldered and rapped with black electrical tap
Parts Used:
High Limit Thermostat
  • keith from ELLENVILLE, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers, Socket set
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!