E23CS75DSSC Electrolux Refrigerator - Parts

This kit includes the ice maker, power cord, bail arm, and fill cup. If your ice maker is not making or dispensing ice, or you notice a leak, you may need to replace the rear-mount ice maker assembly. This ice maker mounts to the back panel in the freezer section of the side-by-side refrigerator. If you are having an issue with the arm of...Read more this kit hitting the shelf, you will have to replace the shelf. You can find the shelf by searching PS1152582. To complete this repair, you will need a 1/4-inch nut driver and a small flat blade screwdriver.

This dispenser crusher housing may also be known as a refrigerator ice crusher housing, and is compatible with your refrigerator. The function of the dispenser crusher housing is to shield the ice crushing blades within the ice container. To make this repair you will need a Phillips screwdriver, a flat blade screwdriver, a quarter-inch nu...Read moret driver, and a pair of channel lock pliers. For this installation, work gloves are recommended. Note that this piece may look different or be a different color than the original, but this part will fit and function in the same way as the original part.

This middle crisper drawer frame provides sturdy support for the crisper drawer cover while helping keep your refrigerator organized and functioning properly. Constructed from durable, wear-resistant ABS plastic, it supports the glass shelf insert and includes integrated slide rails that allow the crisper drawer to open and close smoothly...Read more. Measuring approximately 16-3/4 inches wide by 19-5/8 inches deep, this frame is designed to replace a cracked, damaged, or worn original component and restore proper support within the fresh food compartment. Installation is straightforward and typically involves removing the crisper drawer and glass shelf insert, transferring the glass insert to the new frame if applicable, and reinstalling the assembly. Please note that the glass shelf insert is sold separately and is not included with this frame.

This genuine replacement ice dispenser drum is designed for use with a wide range of refrigerator models. Made from durable plastic, the drum plays a key role in your ice maker by capturing ice and directing it to the crusher for dispensing. It is positioned between the ice dispenser drive plate and the ice crusher mounting plate, ensurin...Read moreg smooth and efficient operation. If the drum becomes damaged or worn, replacing it is a simple process. All you’ll need is a Phillips head screwdriver. Just remove the necessary components to access the drum, unfasten it, and install the new one in its place. This part is sold individually and is compatible with many refrigerator models—check your model’s diagram to confirm fit.

This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amount of cold air goes that goes to internal compartments of the unit. It may need to be replaced if the fridge is noisy or not cold enough. This part is made of p...Read morelastic and is sold individually. It will be necessary to disconnect power to the refrigerator and empty the freezer compartment of the refrigerator. The tools needed to complete this repair are a 1/4 inch nut driver and a pair of needle nose pliers.

Used in the dispenser board area.

Sold individually. This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer door panel. The handle mounting shoulder screw is sold individually. For the repair, you will need a pair of pliers.

Part may not be exactly as shown. This door bin is for refrigerators. Door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.

This clear refrigerator door shelf bin is designed to hold gallon-sized items such as bottles and jars securely on the lower right side of the refrigerator door. Constructed from durable, food-grade plastic, it offers both visibility and strength for everyday use. As a genuine OEM replacement part, it is compatible with select models from...Read more Frigidaire, Electrolux, Kenmore, and other related brands. To ensure proper fit, it is recommended to compare the dimensions of your existing bin with the replacement part before purchasing, as sizing may vary slightly across models. This bin is sold individually and installs easily without tools.

This is an LED light for a variety of refrigerator models. This 3.8W LED light is used to shine and adequately light the contents of your refrigerator when you open its door. If your current light is significantly dimmer than normal, or simply not working anymore, it will need to be replaced. To replace this bulb, unplug your fridge momen...Read moretarily, and then simply unthread the old one and screw in the new one. This bulb is sold individually and does not come with any other parts.

This drive blade is a little under five inches long. It is used for the icemaker of many refrigerators.

This screw is sold individually.