DXPW3625 (Type 0) DeWALT Pressure Washer - Parts

It is an authentic part that is supplied by the original equipment manufacturer. This kit is designed for use with DeWALT pressure washers. This is the special component that the soap injector hose connects to. The kit includes one durable metal injector body, the spring and the ball. It provides an identical replacement for a faulty or a...Read more missing item that was installed on a new unit. Refer to the owners manual and the diagrams of your model for the exact location and the correct application of this soap injector kit. You will need an adjustable wrench to perform this repair.

This thermal relief valve is a genuine part produced by the original manufacturer for DeWALT pressure washers. The valve connects to the pump and protects it from overheating. If the pump gets too hot this valve will pop out to release extra pressure, and prevent excessive damage to the pump. It is an identical replacement for a damaged o...Read morer a missing component that was installed on a new unit. Note, one durable metal thermal relief valve is included. To replace it you will need an adjustable wrench. Make sure to release the pressure from the tank before starting the repair.

This item is a genuine OEM sourced replacement valve kit designed for use with Dewalt pressure washers. This kit includes three (3) inner and three (3) outer valves that fit in the pump. These valve are made out of plastic with metal and they include rubber o-rings. To complete this repair you will need a set of wrenches and a screwdriver.

It is a genuine OEM pressure seal kit which is designed for DeWALT pressure washers. The components are utilized to ensure tight seals between connected parts, preventing water from leaking past the high-pressure side of the piston. Over time seals will wear out and may begin to crack causing water leaks and eventually requiring replaceme...Read morents. The kit contains the necessary parts to maintain or repair your pump. Make sure to check the owner's manual repair guide and the diagrams of your model for the correct installation of the new components. Keep in mind this pressure seal kit is sold as an individual item. To perform this repair a wrench set and a screwdriver will be necessary to take apart and reassemble the pump.

This knob & bolt assembly is an OEM direct from DeWalt. Compatible with several pressure washers, the metal and plastic assembly secures the handle to the frame. No tool should be required for the installation. The knob & bolt assembly is sold individually.

This water inlet screen is a genuine OEM replacement part sourced directly from the manufacturer. It is designed for use with several models of DeWALT pressure washers. This part is placed just outside the water inlet connector. A screwdriver is needed to replace this part. This is a simple installation process that should only take a few minutes.

This is a genuine DeWalt replacement part that has been sourced from the original manufacturer to be used with pressure washers. The clear plastic hose is used to carry detergent from the chemical tank to the pump assembly. This item is sold as an individual replacement part.

***This part has been discontinued by the manufacturer. They do, however, offer an alternative of part# 5140186-12 (Outlet Fitting Kit). It is an authentic part that is supplied by the original equipment manufacturer. This soap injector body is designed for use with DeWALT pressure washers. This is the special component that the soap in...Read morejector hose connects to. It provides an identical replacement for a faulty or a missing item that was installed on a new unit. Refer to the owner\\\'s manual and the diagrams for your model to ensure the correct repair procedure. You will need an adjustable wrench to perform this repair.

This is an authentic DeWalt replacement part manufactured for use with pressure washers. The rubber nozzle holder attaches to the handle assembly or dashboard and is used to stow the nozzles. This nozzle holder is available as an individual replacement part, please see model diagram for associative parts.

The hose connects to the gun and to the pump. This item is available as an individual replacement part and is made of metal and rubber. This is a DeWALT replacement part directly sourced from the manufacturer for use in professional gas cold water pressure washers. It might require a wrench set to replace this part if it breaks or leaks.