DWS709 (Type 20) DeWALT Miter Saw - Parts

This manufacturer-supplied part is made for use with DeWALT miter saws. It is a special clamp that is utilized to secure the cable. This is an identical replacement for a faulty or a missing component that was installed on a new unit. Refer to the diagrams of your model for the exact location and the correct application of this part. This...Read more high-quality clamp is made of durable metal and is sold individually. Note, the screw to secure it is sold separately. You will need a screwdriver to replace this part.

This is an original DeWalt replacement part manufactured for use with miter saws. This retaining ring is used with belt drive miter saws. The ring typically secures the bearing to pinion shaft which is driven by the belt and pulley. This retaining ring is sold individually, please see model diagram for additional parts of the blade drive assembly.

This manufacturer sourced replacement part is designed for use with Dewalt miter saws. It helps to distribute the pressure evenly and allowing parts to be secured safely. This is a standard hardware which has multiple applications based on your equipment, for the proper application please refer to diagrams of your model. This part is made of durable metal and it is sold individually.

This screw is s a standard hardware which has multiple uses based on equipment. It is a genuine OEM sourced part, not an aftermarket equivalent. It is commonly used on a variety of Black and Decker and Dewalt power tools. Please make sure to check appropriate diagrams for correct location and applications for this item. It a metal screw t...Read morehat is sold individually. You will need a torx screwdriver to tighten or loosen this screw.

This is a genuine replacement part which is designed for use with DeWALT and Black and Decker power tools. It is a standard hardware which has multiple applications depending on the model of your unit, make sure to check appropriate diagrams for the correct location and application of this component. Keep in mind this durable screw is made of high-quality metal and is sold individually.

This is a Genuine OEM sourced replacement part designed for use with a variety of Power Tools. It will have different applications based on your tool. This part is made out of Metal and it is Sold Individually. Requires a Torx Screwdriver to tighten or loosen this Screw.

This replacement screw is sourced directly from the original equipment manufacturer for use with Dewalt, Porter Cable and Black and Decker power tools. It is a standard hardware which has multiple applications depending on the model of your tool, please make sure to refer to the appropriate diagrams of your model for the correct location ...Read moreand application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is an OEM part sourced directly from DeWalt for use with miter saws. This petroleum based grease is used to lubricate the system allowing for easy, low-friction movement while protecting parts from the usual wear. One 1.75 oz tube of grease is included per order.

This is an authentic OEM sourced item. This grease is designed for use with DeWalt equipment. It helps to lubricate the system which allows for easy movement and protects parts from usual wear, extending the life of the tool. One 6 ounce tube is included per order.

O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. There are many causes for O-Ring failure, such as pressure, friction, temperature or chemicals. The most common are: • Extrusion and Nibbling...Read moreu> - O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • Abrasion - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication. • Over Compression - O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • Heat Hardening - O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity. • Weather/Ozone Cracking - O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.

Read less