DWE6420R (Type 1) DeWALT Sander Grinder - Parts

This is a brush box assembly designed for various sander models. Brush boxes are essential components that house carbon brushes responsible for transferring electricity from the motor to the sanding pad. When the carbon brush assembly wears out, it can no longer efficiently transfer electricity, causing the sander to stop working. This br...Read moreush box assembly includes the carbon brush, its housing, and the necessary wiring. Replacing the brush box assembly is a straightforward process, requiring only a screwdriver and a set of pliers. Begin by disconnecting your sander from its power source, whether it is a battery or a wall outlet. Next, remove the screws securing the main housing of the sander and locate the brushes inside. Use a set of pliers to disconnect the wire from the old brush and a flat-head screwdriver to lift the old brush out of its slot. Insert the new brush box assembly into the slot and connect its wires. Finally, reattach the sander outer housing and secure it with the screws.

This authentic OEM belt is specially designed for use in sanders. It is a looped, flexible strip made of rubber that is responsible for controlling the movement of the sanding pad. Over time, the belt can wear out, lose elasticity, or break due to regular use or improper installation. When the belt fails, the sanding pad will become unsta...Read moreble and may stop spinning altogether or exhibit erratic movement, resulting in inefficient and inconsistent sanding. To begin the repair, first, unplug the sander and remove the fasteners that secure the housing cover. Locate the old belt and note how it is routed before removing it from the sander. Position the new belt in the sander and ensure that it is aligned and adequately tensioned. Reattach the housing cover and secure it with the appropriate screws.

This authentic OEM dust bag assembly is sourced from the original manufacturer for use in sanders. It consists of a fabric bag and plastic cap measuring approximately 5.5 inches in length and 2.5 inches in diameter. The bag assembly collects the dust and debris that is produced during sanding allowing you to maintain a clean and safe work...Read moreing environment. Over time the bag may tear or wear down, leading to large amounts of dust escaping into the air, health hazards from dust inhalation, reduction in visibility, and a messy work area. Replacing the dust bag assembly is a simple repair that does not require the use of specialized tools. Simply detach the bag from the sander, remove any dust and debris on the mounting surface, and attach the new bag.

This pad assembly (PSA), commonly referred to as a sanding disc, is an original manufacturer part used in orbital sanders. It has four attachment points and a diameter of 5 inches. It features a Velcro backing on one side which allows it to securely hold the sandpaper in place during operation for efficient smoothing of surfaces. If the p...Read moread breaks, becomes dislodged, or is unable to hold the sandpaper, you will notice inefficient and uneven sanding. Remove the faulty pad assembly by removing the retaining screws. If the screws are damaged, worn out, or the threads are stripped, it is recommended to replace them at the same time for optimal performance. Clean the area and align the new pad with the mounting holes. Install the retaining screws to hold it in place. Each pad assembly is sold individually.

This replacement screw is a high quality hardware commonly utilized on Bostitch, Black and Decker, Porter Cable and Dewalt equipment. This is a authentic OEM item which has multiple applications depending on the unit, for correct location and use of this screw make sure to check appropriate diagrams. Please note this torx screw is sold individually.