DW931K (Type 1) DeWALT Miscellaneous - Parts

Included in part number 606883-00

Genuine DeWalt replacement part. rnIncludes 1 Carbon Brush with wire lead and terminal in rubber sheath attached.rnrn • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are ...Read moreone of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

This is a genuine OEM replacement part, it is sold individually. This part is used to keep the brush tight against the armature so the tool will work properly. Over time when the brushes wear down and heat is created, the spring may lose its tension and will have to be replaced.

This is a genuine OEM sourced replacement part designed for use with a variety of power tools. This is a standard hardware which has multiple applications based on your tool. For proper use please refer to diagrams. This is a metal torx T20 metal screw which is sold individually.

This brush ring is an OEM from DeWALT. Compatible with mostly saw devices, the plastic brush ring has been designed to secure carbon brushes. This component is fitted onto the magnet ring. A screwdriver and an Allen wrench are needed in the removal and repair. This part is sold individually.

This is an authentic item that is supplied directly from the original equipment manufacturer for Craftsman Plate Joiners. The Dust bag collects the dust created when operating the saw. The dust bag is made out of fabric and is sold individually. The adapter is sold separately. No tools need to install this part.

This genuine OEM dust adapter in your jointer plate allows you to attach various sizes of vacuum hoses to it for direct dust pick-up. It is part of the dust collection system, you can easily check if the dust adapter is damaged by visually inspecting it for signs of wear or deformations. If you find that it has become loose, fails to crea...Read morete a tight seal, or does not fit the vacuum hose sizes properly, it needs to be replaced. To remove the adapter, firmly pull it out from your machine. When installing the new adapter, insert it into the dust exhaust port on the right side at the rear of the base assembly until it clicks into place. Please keep in mind that this is sold separately from the dust attachment elbow and the dust bag.

This is a genuine replacement part manufactured for use with power tools. The special screw is a versatile fastener used in several applications. The screw is sold individually, please see model diagram for part location and usage.

Genuine OEM replacement part, this item is sold individually. This screw is used in various places in all of the tools listed below The most common use for this screw is to secure plastic housings together. It has a Torx T-20 head.

This is a genuine replacement part sourced directly from the manufacturer. The blade is commonly found in plate joiners from DeWALT and Black & Decker. This part is made of metal, and is used as the active cutting element for the machine. You may require a wrench or screwdriver when replacing this item. The blade is sold as an individual replacement part.

Battery cap