DW505KSLW (Type 2) DeWALT Drill - Parts

This is an OEM Manufacturer Sourced replacement part used on certain Hammer Drills. Includes One (1) Carbon Brush with wire lead attached. Please note: this brush is sold individually and most tools would use Two of these carbon brushes. It is always best to replace both brushes, even if only one is worn. Carbon brushes are one of the mo...Read morest commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This connecting ball is an authentic manufacturer replacement part used in various power tools. It is a stainless-steel ball that provides a pivot point that allows the attached components to move back and forth smoothly during use. If the connecting ball falls off or becomes loose, worn out, or damaged, the equipment will become unstable or unable to move at all.

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with circular saws and hammer drills. The special retaining ring is commonly used to secure the fan to the armature's shaft. This item is available as an individual replacement part, please see illustrated diagram for associative parts.

Included in part number 585500-00

This is an authentic replacement part manufactured for use with power tools. The rubber plug is commonly used to provide spacing at the linkage between part assemblies. This plug is used with several different models of equipment and can have different applications depending on the model of equipment. This rubber plug is available as an i...Read morendividual replacement part, please see model diagram for part location and usage.

This is an identical replacement for a damaged or a missing selector that was installed on a new tool. The selector allows a user to adjust the setting of the drill. To ensure the correct application and repair procedure, check the owner's manual and the diagrams for your model. Keep in mind this high-quality item includes one durable pla...Read morestic knob, the metal selector, and the screw to secure it. This authentic component is supplied by the original equipment manufacturer for use with DeWALT and Black and Decker hammer drills.

This is an authentic replacement part manufactured for use with DeWalt power tools. The ID Label is a sticker of the DeWalt logo and is often needed when the tools housing is replaced. This logo is sold as an individual replacement part, please see model diagram for associative parts.

This Trigger switch has internal terminals, a heat sink, a locking mechanism for the switch and a forward/reverse lever. This authentic DeWalt replacement part is sold individually. Switches are commonly replaced parts in power tools, handling all on/off and variable speed operations. They also have a role in electric breaking; they can...Read more momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. Some common signs of a broken or failing switch are: • The tool will not start when you use the switch, or it requires multiple tries to turn on, until eventually it refuses to start at all. • The variable speed function and electric braking aren't working properly.

This is an original part sourced directly from DeWalt. This grease was designed for use with the equipment listed below and helps to lubricate the system. This extends the life of the tool and protects parts from usual wear by allowing for easy movement. This item is sold individually.