My Orders
DW488 (Type 1) DeWALT Angle Grinder - Parts
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$6.40
In Stock
Screw
Part #96089-00
This is a genuine manufacturer-sourced replacement screw which is specially designed for use with DeWALT and Black and Decker power equipment. It is a standard hardware which has multiple applications based on the model of your unit, please refer to appropriate diagrams for the correct location and use of this part. This high-quality scre...Read morew is made of durable metal and it is sold individually, over time the threads or the head may wear out eventually requiring a replacement to ensure the proper fit.
Read less
$6.40
In Stock
O Ring
Part #96122-00
O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. rnrnThere are many causes for O-Ring failure, such as pressure, friction, temperature or chemicals. The most common are: rn • Extrusion and Nibbling...Read moreu> - O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. rn • Abrasion - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication. rn • Over Compression - O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. rn • Heat Hardening - O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity.rn • Weather/Ozone Cracking - O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.
Read less
No Longer Available
Holder,Brush
Part #400771-01
No Longer Available
Carbon Brush
Part #131602-00
Genuine DeWalt replacement part rnIncludes 1 Carbon Brush with wire lead and brush spring attached.rnrn • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced ...Read more power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Read less
$6.09
Special Order
Brush Cap (sold Individually)
Part #131882-01
This is a genuine manufacturer-sourced replacement part designed for use on Ridgid power tools. The purpose of the brush cap is to hold the brush, this cap has external threads that thread into the housing of the tool. This high-quality item is made of durable plastic and it is sold individually, please note the rubber o-ring is included.
No Longer Available
Ball Bearing
Part #158475-00
This is a genuine item that is supplied directly from the original equipment manufacturer for use with DeWALT and Black and Decker power tools. The purpose of a bearing is to allow connected parts to rotate with minimum friction, unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement. It...Read more is an identical replacement for a missing or a faulty bearing that was installed on a new unit, please make sure to check the diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.
Read less
No Longer Available
Screw
Part #99433-14
$6.40
Special Order
Washer
Part #417-00
No Longer Available
No Longer Available
Handle, Side
Part #933499-00
This authentic manufacturer-supplied part is specially designed for use with DeWALT and Black and Decker grinders and sanders. It is a special side handle that provides a user with a comfortable grip for operating the tool. This is an identical replacement for a missing or a damaged component that was included with a new unit. The handle ...Read moreis sold individually. It features a durable threaded metal shaft and a rubberized grip. Make sure to refer to the owner's manual and the appropriate diagrams for your model to ensure the proper replacement procedure.
Read less
$58.87
Special Order
Grease, 6 Oz.
Part #5140061-28
This is an authentic OEM sourced item. This grease is designed for use with DeWalt equipment. It helps to lubricate the system which allows for easy movement and protects parts from usual wear, extending the life of the tool. One 6 ounce tube is included per order.
$6.40
In Stock
Terminal
Part #053650-03
This is an authentic manufacturer-sourced component which is made for use with DeWALT and Black and Decker power tools. It is the special terminal that allows a user to connect a wire. This is an identical replacement for a missing or a faulty hardware that was installed on a new unit. Please make sure to refer to the appropriate diagrams...Read more of your model for the correct location and application of this part. Keep in mind this high-quality terminal is made of durable metal and is sold individually.
Read less