The drum belt attaches to the motor pulley and causes the drum to spin as the motor is rotating. The drum belt is made of black rubber. This is an easy repair and should only take a few minutes. This goes between the drive motor and the dryer drum. The belt may have broken, which will cause the drum to not turn properly. You will need to ...Read morepull your dryer away from the wall and use your Phillips screwdriver to remove the screws on the back. This is an OEM product, shipped directly from the manufacturer.
This genuine OEM heater duct assembly in your dryer directs hot air into the drum during operation. Generally, it can be found behind the drum or at the rear of the dryer. If this assembly becomes damaged, you may encounter problems such as clothes not drying properly or drying unevenly. This kit includes the housing with the heating element coil and attached insulators.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The dryer turned on but the drum did not move when you pressed start even though It started it cycles.
42 of 79 peoplefound this instruction helpful.
Christopher from SUGARLOAF, CA
Really Easy
15 - 30 mins
Screw drivers
I YouTube it and there’s a step by step process on how to do it, took maybe 30 mins. If I can so can you
Was this helpful?
Thank you for voting!
Dryer stopped heating
6 of 8 peoplefound this instruction helpful.
Mark from WEST SUNBURY, PA
Really Easy
30 - 60 mins
Nutdriver, Screw drivers
I purchased wholesale heater element with sensors. Couple wires and bolts to attach. Trickiest part is disassembling the dryer to remove the old heating unit. You-tube it; it's gold.
Was this helpful?
Thank you for voting!
Door seal was torn and falling apart
3 of 3 peoplefound this instruction helpful.
Jon from San Diego, CA
Really Easy
15 - 30 mins
Screw drivers
Separated the outer door from inner door, removed glass globe. Replaced the seal