All Installation Instructions for Magic Chef Dishwasher DU110DA-45

Spring that holds door closed

10 of 20 people found this instruction helpful.

Bessie from Fruitland Park, FL
Really Easy
15 - 30 mins
Pliers, Screw drivers

First, removed screws on bottom panel. On this model, everything was easy to see. Did not have to move the appliance at all. The left side wire was broken. Just removed the broken part, connected the new wire, and then the springs to it. No problem at all. Took about 15 mins.

Was this helpful?

Wouldn"T Drain The Water Completey

4 of 7 people found this instruction helpful.

clarence from ST LOUIS, MO
Really Easy
1- 2 hours
Pliers, Screw drivers

Removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. . . )

Was this helpful?

Door mechanism broken

3 of 7 people found this instruction helpful.

Chung from Petaluma, CA
Really Easy
Less than 15 mins
Screw drivers

First removed the two screws and then the bottom part of the door. Replaced the broken cable & eyelet assy with the purchased part. Connect the eyelet with the two springs which tied with door mechanism with other cable/eyelet assy. Done

Was this helpful?

door spring broken

2 of 5 people found this instruction helpful.

Tracy from Montour Falls, NY
Really Easy
Less than 15 mins
Screw drivers

It was really easy- Loved the fact that you had a picture of the part needed on your website, it really made finding the part we needed very easy. I would highly recommend your site- the part came quickly, also

Was this helpful?

Cable for door springs broke

William from Philadelphia, PA
Really Easy
Less than 15 mins
Pliers

Attached new cable and eyelet to existing springs. Took all of 5 minutes to install. Very easy. Works great.

Was this helpful?

DU110DA-45 Magic Chef Dishwasher - Instructions