DRT70 Husqvarna Tiller - Parts

This OEM kit includes all the necessary hardware, including new bearings, oil and rubber seals, and rivets, to replace the tine shaft bearings on your tiller or cultivator. The tine shaft bearings support the tine shaft inside the gear case of your machine. If the bearings are damaged, you may experience rattling or squeaking noises, exce...Read moressive vibrations, and difficulties in maneuvering. Uneven tilling or cultivating is a clear indication that the bearings need replacement. To locate and replace your tine shaft bearings, consult your user guide as they can be found on either side of the tine shaft. It is commonly found inside the gear case. You will need to remove any retaining rings holding the bearings in place with pliers or screwdriver. You may need to use a penetrating oil if the bearings are stubborn. Please note that this kit is sold separately from the tine shaft.

Steel balls serve various purposes throughout power equipment, being used within bearings, valves, pulleys, and clutches. Depending on the use for your equipment, these balls can serve different purposes, but these are designed for use within tillers and lawnmowers, and work within shift fork mechanisms, and lock/align with notches on the...Read more mating component, to prevent unwanted shifting or disengagement during operation. This kit comes with 12 steel balls and is an OEM part, without any other hardware. To avoid problems with your equipment and avoid constant repairs of its steel balls in the future, make sure that they are cleaned, lubricated and regularly inspected before and after each use. If you notice issues with gear shifting such as slipping or difficulty engaging the gear, these balls may be worn down and inoperable, and will need replacing immediately. To replace these balls, the process may look different for each model, but generally it will require a screwdriver and socket wrench to access the mechanisms. Make sure to clean and adequately lubricate the mechanisms, according to the manufacturer specifications.

This part is an OEM from the Poulan manufacturer. The bolt is constructed of high-quality metal, and has been designed for use with a variety of lawn and garden machines. Please refer to the specific manual and diagrams for repair instructions. This item is sold individually. A screwdriver and a wrench are often helpful in the removal and replacement.

This is a genuine OEM replacement part that is used for lawn mowers and tractors across a number of brands. This is standard hardware which has multiple applications based on your tool. Please refer to diagrams for proper application. It is made out of metal and it is sold individually. You would need a wrench to remove or install this bolt.

It is a genuine OEM item that is made for Craftsman lawn and garden equipment. This is a special component which helps to provide a tight fit for the connected parts. Over time it may wear out and get compressed eventually requiring a replacement. Check the appropriate diagrams for your model to ensure the proper repair procedure. This high-quality seal is made of durable metal and is sold as an individual item.

This is an OEM sourced replacement part that is manufactured to be used with garden tillers and lawn tractors from Poulan and Husqvarna. This item is used with various types of equipment, please see your model\'s illustrated part diagram for this ring\'s location and usage. This part is sold individually.

This clip ring, also known as a retaining ring or snap ring, is a genuine OEM replacement part for your lawn and outdoor equipment. The clip ring is a type of fastener that secures various parts together. Over time it is normal for it to corrode or become deformed. A faulty snap ring will result in increased noise, excessive vibration, lo...Read moreose components, and premature part failure. Therefore, it is important to address this issue promptly. It is recommended that you use snap ring pliers for the repair as they allow you to expand and compress the ring for easy removal and installation. Sold individually, make note of the number of clip rings you need for your equipment and order accordingly.

This is an original replacement part sourced directly from the manufacturer. The needle bearing is commonly found in Husqvarna tillers. This part is made of metal, and is used to allow the reverse idler shaft to spin freely. Please be aware that there are different needle bearings used in the machine. Refer to the parts diagram to be sure of ordering the correct part. This item is sold individually.

This lever lock is found on your lawn equipment. It helps you lock the lever in place and operate your machine without having to hold it down continuously. This is usually located near the handle or the grip of your machine. If the lever lock is damaged, the lever may not stay in place and your engine may stop running when you let go of t...Read morehe lever. To ensure that your machine works smoothly, you must replace a defective lever lock. Detach the damaged lever lock from the locking mechanism using pliers or a screwdriver and slide it off its shaft or pin. Since this authorized OEM part is purchased individually, review your user manual to confirm the exact number of locks your machine needs.