- Home
- DP920PFGY1
- Instructions
DP920PFGY1 Whirlpool Dishwasher - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
dishwasher leaked
10 of 13 people
found this instruction helpful.
-
SHANE from Dunkirk, NY
- Really Easy
- Less than 15 mins
first i picked out the old seal, use a screwdriver to get it started. Then I pushed the new one in after cleaning the seal channel. I fixed it during a commercial while watching my favorite tv show.
Was this helpful?
Thank you for voting!
Dish Washer was leaking badly
10 of 13 people
found this instruction helpful.
-
Michael from Germanton, NC
- Really Easy
- Less than 15 mins
Simply removed deflectors and gasket, replaced all , took all of 5 mins. workes great now.
Other Parts Used:
Was this helpful?
Thank you for voting!
the axels for the wheels of therack adjusters deteriated
10 of 17 people
found this instruction helpful.
-
gerald from pine river, MN
- Really Easy
- Less than 15 mins
replaced the rack adjusters
Was this helpful?
Thank you for voting!
The original faucet adapter for portal dishwasher kept misting water out the sides of the adapter most annoyingly.
8 of 11 people
found this instruction helpful.
-
Scott from Oak Harbor, OH
- Really Easy
- Less than 15 mins
So I decided to stick in some CLR to see if it would clean it up. Well it got considerably worse. So ordered the new faucet adapter, threaded adapter and the two washers, due to not knowing what i would need. It came like unbelievably fast considering it was Christmas time. Unscrewed the old one from the faucet, screwed on the new one.
... Read more
hooked up the dishwasher, watched it for a bit for any leaks at the connection, and it worked great! I seem to have more water pressure too coming from the sink faucet. Thank you so much for the quickness in sending out my order! -- Scott
Read less
Was this helpful?
Thank you for voting!
Needed a tub sound shield
7 of 8 people
found this instruction helpful.
-
Carol from REIDSVILLE, NC
- Really Easy
- 15 - 30 mins
All I had to do is lay the shield over the top and sides and used a couple of clips to hold in place as it was slid under the counter top. It couldn’t have been easier.We had searched everywhere for this replacement shield and parts select was the the only ones that had it. Very good service and fast delivery,
Was this helpful?
Thank you for voting!
solution leaking from bottom of door.
7 of 9 people
found this instruction helpful.
-
Joseph from Montello, WI
- Easy
- 30 - 60 mins
first I removed lower basket. then removed lower sprayer attached to pump housing by unscrewing the cap by hand. the I removed the pump cover . there were six alan screw two of them were missing causing the failure of the seal spraying solution at the door. replaced the pumpseal working backwards until everthing was replaced.
Was this helpful?
Thank you for voting!
No water flow to upper wash tray
7 of 9 people
found this instruction helpful.
-
Roger from Watauga, TX
- Really Easy
- Less than 15 mins
The cap.nozzle is critical in transferring water to the
upper wash tray in the "heavy wash" cycle only. If this part is defective, simply unscrew it by hand and install the new one by hand in seconds. This
part is inactive in the "light wash" cycle.
Look for deteriation in the black rubber area of the
cap. nozzle ... Read more .
Ordering and tracking the shipment was a breeze,
everything was very easy to do !!!!
upper wash tray in the "heavy wash" cycle only. If this part is defective, simply unscrew it by hand and install the new one by hand in seconds. This
part is inactive in the "light wash" cycle.
Look for deteriation in the black rubber area of the
cap. nozzle ... Read more .
Ordering and tracking the shipment was a breeze,
everything was very easy to do !!!!
Read less
Was this helpful?
Thank you for voting!
The cap of a vertical tine in the dishwasher had come off, leaving an exposed, rusted and sharp top.
16 of 36 people
found this instruction helpful.
-
Joan from Rockville, MD
- Really Easy
- Less than 15 mins
The old tine row came out easily and the new one was easy to pop into place. I was pleased that it was so easy to order a replacement part.
Was this helpful?
Thank you for voting!
dishwasher was overflowing
6 of 6 people
found this instruction helpful.
-
paul from cambridge, OH
- Easy
- Less than 15 mins
-
Screw drivers
actually my wife did the repair. she unsrewed the water sprayer and removed it, then unscrewd the star key screws and then replaced the seal. she put everything back the way it was and it is now ready to use and we no longer have the problem.
just a suggestion...if you take some baking soda and some vinager you can clean the drain ou ... Read more t. just simply poor in the soda and then the vinager.and it will fiz cleaning your drain.
just a suggestion...if you take some baking soda and some vinager you can clean the drain ou ... Read more t. just simply poor in the soda and then the vinager.and it will fiz cleaning your drain.
Read less
Was this helpful?
Thank you for voting!
Dishwasher made a crunching, grinding sound and then stopped working.
10 of 19 people
found this instruction helpful.
-
Carisa from Elk Ridge, UT
- Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
I followed the video available on partselect.com and was easily able to follow step by step the process of removing and reinstalling a new Drain and Wash Impeller and Check Ball.
Other Parts Used:
Was this helpful?
Thank you for voting!
Water intake hose leaked between plastic/hose connection (metal crimped clamp)
13 of 28 people
found this instruction helpful.
-
Stanley R from Pineola, NC
- A Bit Difficult
- 1- 2 hours
-
Nutdriver, Pliers, Screw drivers
Since I had never made a repair on this 14 year old Kitchen Aid dishwasher, it was "discover as you go." First turned it on its back, took off bottom, disconnected both hoses and found out that hoses would not move. So, had to take off top and remove the back/side unit to get to hoses on top side where they were fastened by tape and a hos
... Read more
e holder. Replaced hoses, used old clamp and "buttoned" it up.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Dishwasher wouldn't run
5 of 5 people
found this instruction helpful.
-
Kathy from Memphis, TN
- Very Easy
- 15 - 30 mins
Turned off electricity. Removed the interior door cover. Removed door switch. Replaced switches & reversed process. By the way - I am a woman & diagnosised, ordered part & fixed it myself - I have no experience in this field. THANKS for all your information on your site.
Was this helpful?
Thank you for voting!
Dishwasher inoperable, thermal fuse blown, door switch OK
8 of 14 people
found this instruction helpful.
-
Richard from Eugene, OR
- A Bit Difficult
- 15 - 30 mins
-
Screw drivers
Turned off the power to the Dishwasher. Removed 6 Torx screws holding control panel cover. Disconnected the connectors to the control assembly. Removed and replaced the control board. Replaced the thermal fuse and the door switch. Reconnected the connectors. Reassembled the control panel cover. Turned on power and tested the DW. A
... Read more
ll OK.
Read less
Was this helpful?
Thank you for voting!
Inserting Lid Spring
8 of 14 people
found this instruction helpful.
-
Emile from Jamaica, NY
- A Bit Difficult
- Less than 15 mins
-
Screw drivers
Had to be careful positioning the spring without breaking the hinge pin. Requires a certain amount of patience.
Other Parts Used:
Was this helpful?
Thank you for voting!
my wheels to the top rack broke.
5 of 6 people
found this instruction helpful.
-
Melissa from Pomona Park, FL
- Really Easy
- Less than 15 mins
when my package arived , I open the box and pop on my wheels, and all fixed in 60 sec. Thanks you saved me about 650.00 for a new Dishwasher. Thanks Melissa
Was this helpful?
Thank you for voting!