EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

DM81KB Magic Chef Microwave - Instructions

All Instructions for the DM81KB
16 - 22 of 22

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The food residue sealed the door, and the door release button lever snapped.
0 of 1 people found this instruction helpful.
  • Michael from Duluth, GA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Wrench (Adjustable)
I pulled the control panel out, slid the door release out of where the tabs held it in, slid the new one into place (noticing the new one had reinforcement where the old one did not), and pushed the control panel back.
Was this helpful?
Thank you for voting!
Door release was broken
0 of 1 people found this instruction helpful.
  • Kenneth from Freeport, IL
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
removed the "cowling"

remove 3 screws hols assembly together,took out old door realease and replaced with a the new one.

Works great
Was this helpful?
Thank you for voting!
Could not open Microwave door
0 of 2 people found this instruction helpful.
  • Jeanne from Harlingen, TX
  • Easy
  • 15 - 30 mins
  • Screw drivers
We had to remove the cover on the microwave in order to have access to interior. At that point all we had to do was remove the old part and install the new one. This microwave is in our Motorhome and is 15 years old! We were totally amazed that you had the part available and were able to make the necessary repairs for less than $5.00! In addition to that we had the part in 3 days. Thank you so much for your response time and the availability of the part.
Was this helpful?
Thank you for voting!
Door release button broke
  • Philip from Spartanburg, SC
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Old rotary-timer microwave. Model number worn off. Unplug and discharge capacitor voltage. Remove 3 Phillips screws to slide-back, and off the sheet metal cover. Remove front, control panel retaining screw (inside, top of control panel frame) with small socket (8 mm?). Lift up and pull out panel clearing retaining plastic tabs. No need to disconnect wiring. Wiggle new button in place with pivot tabs resting in the mounting slots. Check door action before reassembling and returning to service. Local parts supply estimated 10 days to order part. Ordered from PS Friday night...received Monday. Great service!
Was this helpful?
Thank you for voting!
Door would not open.
  • Robert from Hickory, KY
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Removed cover (top and sides) Found problem. Broken release. Removed control and removed old broken release lever. With a screw driver removed the broken piece. Ordered parts from PartSelect and received them the next day. Great service. When we received the parts we put it all back together.
Was this helpful?
Thank you for voting!
The door release lever broke, and we couldn't open the door.
  • Mark from Coopersburg, PA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
I removed the microwave from the cabinet. Removed the 3 screws on the rear side to remove the shroud. Next I removed the screw at the top of the touch panel. That allowed me to lift the panel enough to remove the original release handle, and install the new one. Works great!
Was this helpful?
Thank you for voting!
All Instructions for the DM81KB
16 - 22 of 22