Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DLL2880ABC > Parts

DLL2880ABC Hotpoint Dryer - Parts

All parts for the Hotpoint Dryer DLL2880ABC

Below is a list of all parts for the Hotpoint Dryer DLL2880ABC - Residential . To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the DLL2880ABC
1-14 of 190
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$53.22

Rear Drum Bearing Kit

This rear drum bearing kit includes a shaft, ground strap, bearing, seven screws, and installation instructions. The bearing plate comes with a slot in it for the ground strap. Thi...

$3.71

LATCH DOOR

This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on the door strike, and will not stay closed, you may need to replace the door latch. This part is square in shape, and is approximately 3/4-inch in length, by 3/4-inch in width. The part is made of white plastic with a metal tab. To access the door latch, you will need to remove the top and side panels on your dryer. To complete this repair, simply pop the damaged door latch out of position, and snap the new one into place.

$4.88

Adjustable Leveling Screw

$5.21

Rear Drum Bearing

This part is the rear dryer drum bearing only. This part helps keep your dryer running smoothly as possible with as little noise as possible.

$2.12

Screw

This screw is sold individually.

$9.64

Idler Pulley Wheel

This white idler pulley is used for many clothes dryers. A dryer's idler pulley wheel serves to help the belt to rotate the drum.

$22.09

Gas Igniter

Be very careful to not handle the igniter by its gray part. Hold it by its white tip only.

$143.09

Drive Motor

Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.

$53.13

Heat Detector

Also known as Flame Sensor/Detector.

$50.50

Blower Wheel

This wheel attaches to the motor.

$7.23

Screw Kit - Package of 12

$55.16

Start Switch

$18.14

GR STRAP ASM

$12.03

DRIVE BELT

All Parts for the DLL2880ABC
1-14 of 190