My Orders
- Home
- DLL2450RBL
- Instructions
DLL2450RBL Hotpoint Dryer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No flame. Igniter came on but no gas.
2 of 2 people
found this instruction helpful.
-
Gary from CHRISMAN, IL
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Wrench set
Opened up dryer for access to all components and tested. All checked good. Put back together and tested and igniter came on but no flame. Purchased two new coils and tested again. No flame. Purchased complete valve assembly and replaced old one. Tested again and viola, success! TY PartSelect for exact replacement part.
Was this helpful?
Thank you for voting!
No heat from dryer. Diagnosed by others as the Gas Valve
1 person
found this instruction helpful.
-
William from Deerfield, IL
- Easy
- 15 - 30 mins
-
Screw drivers, Wrench set
Watched tecnician (I paid) as he diagnosed the problem. Four screws take of the top and front. Clothes drum slides out. Access to valve is good. Valve attaches to feed via compression fitting. Male end of fitting on unit is moved to new unit via allen wrench. Drive belt is re attached around drum and over idler easily. Part co
... Read more
st $90.00 shipp0ed to me. Technician asked $375.00 for this repair. Access the parts via placing the model number on Google Search.
Read less
Was this helpful?
Thank you for voting!