DLEC855W (ABWEEUS) LG Dryer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dryer Plastic lint filter broke after 6 years of nearly daily use...go figure.
7 of 8 people
found this instruction helpful.
-
Randall from DRIFTWOOD, TX
- Very Easy
- Less than 15 mins
Opened the box, cut open hermetically sealed bag...oops, should have added scissors to "tools used." Pulled replacement lint filter out of huge inner plastic bag. Walked to utility room, opened dryer door. Removed original filter from dryer, inserted new filter, discarded old filter and plastic bag, put shipping box into recycle bin. Too
... Read more
k more time and skills to complete this silly survey. Spouse was amazed with my home maintenance abilities. One more thing off the "honey-do" list. Worn out, took a nap.
Read less
Was this helpful?
Thank you for voting!
Dryer work but wouldn’t shut off when finished cycle, had to shutoff from breaker
4 of 7 people
found this instruction helpful.
-
joaquin from MIAMI BEACH, FL
- Very Easy
- Less than 15 mins
-
Screw drivers
With a thin flat screwdriver I was able to pry out the old door switch, I replaced it with the new door switch, pushed back in dryer and so far is working since I installed a month ago.
Was this helpful?
Thank you for voting!
TE3 Error Code
2 of 2 people
found this instruction helpful.
-
Dwain from WHITE PLAINS, NY
- Easy
- 30 - 60 mins
-
Screw drivers
Remove the top and front door. The piece is behind the control panel.
Was this helpful?
Thank you for voting!
Very noisy dryer
2 of 3 people
found this instruction helpful.
-
Radcliffe from Brooklyn, NY
- Really Easy
- More than 2 hours
-
Screw drivers
My wife was told bearings better off buying a new machine decided to take it apart and take a look fan was broken finish it today machine is working like brand new
Was this helpful?
Thank you for voting!
Replaced Motor
1 person
found this instruction helpful.
-
Stephen from Eugene, OR
- A Bit Difficult
- More than 2 hours
-
Nutdriver, Screw drivers, Socket set, Wrench set
Sides, back, front and top of dryer need to come off and drum needs to be removed to get at motor. Once the drum is out replacing motor is pretty easy - just remember that to remove the fans from the old motor the bolts are reverse tapped (right/loose - left/tight). Make notes/take pics on all the screws that come out and wries that get d
... Read more
isconnected and it's not too bad. First time took me about 4 hours, if I had to do it again it would be less than 2 hours.
Read less
Was this helpful?
Thank you for voting!