DH212 (S78311001001 - S78311999999) Shindaiwa Hedge Trimmer - Parts

This is a genuine replacement part manufactured for outdoor power equipment. This plastic starter drum can also be called the starter pulley, because the starter rope is wrapped around the drum, and the starter spring provides tension to recoil the rope. The starter drum is sold individually, and the spring and rope are available separate...Read morely. Additional recommended parts: • Starter rope, part number: 17722610120 • Recoil spring, part number: 17722042030

This part is an authentic manufacturer-sourced replacement part which is specially designed for trimmers, brushcutters and blowers. This part is sold individually and made of metal. The return spring helps return the starter pawl back to the regular position after you are done starting the engine with the recoil starter.

This OEM cylinder gasket, also called the head gasket, is positioned between the crankcase and cylinder head in your lawn equipment engine. It seals the combustion chamber to maintain compression and prevent gas or oil leaks. It also acts as a protective barrier, keeping contaminants out of the engine. Signs of a damaged gasket include ov...Read moreerheating, leaks, rough idling, loss of power, or misfires. If the gasket is broken, oil and coolant can mix with the combustion chamber, leading to engine damage and costly repairs. Debris and contaminants will also enter the engine, reducing the lifespan of your machine. Consult your user manual for instructions on locating and accessing the cylinder head to replace the gasket. Once removed, carefully scrape off the old gasket using a scraper, being cautious not to damage the mating surfaces.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Echo and Shindaiwa lawn and garden equipment. This special component is utilized to provide a tight seal between connected parts, please make sure to refer to the appropriate diagrams of your model for the correct location and application ...Read moreof this hardware. Keep in mind over time the material may wear out and crack eventually requiring a replacement. It is a high-quality seal which is made of durable material is sold individually.

This manufacturer sourced replacement part is designed for use with Shindaiwa and Echo handheld lawn and garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This is a standard hardware which will has multiple applications depending on your equipment. This lock nut is made from high quality metal and it is sold individually.

This item has been OEM sourced to be used with trimmers, blowers, hedge clippers, gas-powered drills, edgers, and pruners. The starter pawl is used as a connection between the flywheel and the recoil pulley. This item spins when the starter rope is pulled and in turn, the flywheel gets rotates to start the motor. This item is a complete part that includes both springs and both pawls.

This genuine OEM replacement part is specially produced for Shindaiwa and Echo handheld lawn and garden equipment. It is generally used to secure the muffler, for correct application of this hardware please make sure to check appropriate diagrams of your unit. This hex socket head bolt is made from durable metal and it is sold individuall...Read morey. When installing or removing this bolt you will need a hex key which is also known as an allen wrench.

The spur gear fits next to both of the cutter blades, one for each blade. Keep in mind that this high-quality part is sold individually even though two are required. This part is an OEM from Shindaiwa and Echo for use in trimmers and hedge clippers. It is made out of metal and helps to move the blades. The gear will need to be replaced if...Read more it breaks or becomes stripped and may require a screwdriver when doing the replacement.

This is an OEM component that is specially made for use with an Echo and Shindaiwa handheld lawn and garden equipment. The ignition switch is used to turn the engine on or off. Unfortunately, over time it may wear out and begin to fail eventually requiring a replacement. This high-quality ignition switch is sold individually. You will need a screwdriver to take apart the housing in order to perform this repair.

Authentic manufacturer approved replacement part used on hedge clippers/trimmers. The purpose of this bolt is to secure the cutter blade to the driving unit. This is a hex head bolt and it is sold individually. When installing or removing this bolt you would need a wrench.

It is a genuine manufacturer approved replacement part that is specially designed for Shindaiwa and Echo handheld lawn and garden equipment. This is the rear handle set that houses the trigger switch and provides user with a comfortable grip for operating the unit. It is a complete set that includes both plastic left and the right pieces ...Read moreof the handle, please note the hardware to secure them and other components are all sold separately.

This is a genuine OEM sourced part from the Echo manufacturer. The fuel tube (3x5x195mm) is composed of flexible plastic, and is compatible with many trimmer tools. The tube is fitted into the fuel grommet of the fuel tank assembly. This part is sold individually. A screwdriver is needed in the making the repair.