DG19CD Maytag Dryer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No heat burner wouldn't ignite
Removed front panel, bypassed door switch to allow dryer to cycle on. In the regular setting the igniter cycled OK but, no gas flow. I disconnected and sepperated the three solinoid coils (be sure to mark them the wires have to be exactly as they came apart) then, tested each coil with an ohm meter. The booster coil was open causing the problem. Replaced the booster coil dryer works fine.
Parts Used:
-
Michael from Whitehall, MI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!