My Orders
DENNIS General Electric Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Floor of microwave cracked
9 of 12 people
found this instruction helpful.
-
Rich from Baltimore, MD
- Really Easy
- Less than 15 mins
Removed the broken pieces of the microwave floor and placed the new one in, careful that the gasket didn't slip off.
Was this helpful?
Thank you for voting!
loud hum & the microwave quit working
5 of 7 people
found this instruction helpful.
-
Richard from Yorktown Heights, NY
- Easy
- 30 - 60 mins
-
Screw drivers
remove the housing,replaced the magnetron and reassembled.no problems at all
Was this helpful?
Thank you for voting!
Bottom Of Oven Cracked
5 of 8 people
found this instruction helpful.
-
RICHARD from Santa Rosa, CA
- Easy
- Less than 15 mins
Removed broken bottom tray no tools needed slid new tray in, rather a tight fit because of the gaskets around the edges. The door now must be more firmly closed. Works fine. . Wife happy. . . . . . .
Was this helpful?
Thank you for voting!
Ceramic base in microwave split
3 of 4 people
found this instruction helpful.
-
Michael from Fort Myers, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Pulled old base up easily with screwdriver. Slipped new base in very easily. Perfect fit.
Was this helpful?
Thank you for voting!
Rack in freezer keep falling down.
3 of 5 people
found this instruction helpful.
-
Beverly from PARSIPPANY, NJ
- Very Easy
- Less than 15 mins
The spacer just snapped onto the rack giving it a little more width to hold the shelf on the guides. Not the best fit but hopefully will do the trick long term. I thought it would have been a bigger part.
Was this helpful?
Thank you for voting!
oven made a loud buzzing & would not heat
3 of 5 people
found this instruction helpful.
-
Ernest from Riverview, MI
- A Bit Difficult
- 1- 2 hours
-
Nutdriver, Pliers, Screw drivers
completly removed outer cabinet,discharged capicator,removed some internal parts so I could get at the magnetron,
.removed replaced magnetron,reinstalled inner parts& cabinet .tested microwave viola
everything worked again.
Thanks, PartsSelect
Ernie
.removed replaced magnetron,reinstalled inner parts& cabinet .tested microwave viola
everything worked again.
Thanks, PartsSelect
Ernie
Was this helpful?
Thank you for voting!
Stopped heating and had a banging noise
-
Alan from Bonita, CA
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers, Socket set
I took instant pictures at each step to make sure I put the wires back correctly. Removed the front panel. Discharged the capacitor with a voltage meter. Removed parts in front of the magnetron. Removed and replaced the magnetron. Reassembled. Works find now. Small hands, a flashlight and a magnet (for dropped screws) would help.
... Read more
I did not need the pictures.
Read less
Was this helpful?
Thank you for voting!