DCD930VX (Type 1) DeWALT Electric Drill - Parts

This is an authentic part made by the original equipment manufacturer for use with DeWALT hammer drills. The bearing cap which helps to secure a bearing in place. It is an identical replacement for a faulty or a missing hardware that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the c...Read moreorrect location and application of this part. Keep in mind this high-quality component is made of durable plastic and is sold individually.

This is a genuine manufacturer approved replacement switch. It is specially produced for DeWalt hammer drills. It is the part of the tool handling on/off operations as well as the variable speed and reverse functions of a tool. Mechanical switches will wear out over time requiring a replacement. Switch has a plastic body and it is sold i...Read morendividually. Please note, this switch has an LED light build into it. To complete this repair you will need a screwdriver. • Remove the housing screws • Carefully remove the housing pieces • Disconnect wires from the old switch • Remove the old switch • Secure the new switch in the housing • Connect the wires • Reassemble and test the tool

This is a genuine Dewalt replacement part, it is sold in a set of two. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power ...Read moretool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.