DC380 (Type 1) DeWALT Reciprocating Saw - Parts

This is a Genuine Manufacturer Sourced replacement part designed for use with Makita Miter Saws. This spring is an important part of the tool-less blade clamp assembly. This Torsion Spring is made out of Metal and it is sold individually. Replacing this item you would need a Screwdriver and Pliers.

Genuine DeWalt replacement part. rnIncludes 1 Carbon Brush with wire lead and terminal in rubber sheath attached.rnrn • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are ...Read moreone of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

This is a genuine OEM replacement part, it is sold individually. This part is used to keep the brush tight against the armature so the tool will work properly. Over time when the brushes wear down and heat is created, the spring may lose its tension and will have to be replaced.

This blade clamp collar is an authentic OEM component. It is specially made for Black and Decker and DeWALT reciprocating saws. Over time it may wear out, get damaged or simply lost eventually requiring a replacement. This high-quality blade clamp collar is made of durable plastic and is sold individually. Refer to the owner's manual and ...Read morethe diagrams for your specific model for the correct application. You would need a screwdriver to take the housing apart in order to replace this component.

This is an authentic replacement part that is sourced from the original manufacturer for use with hedge trimmers. The special screw is commonly used to secure the front guard assembly. This screw is sold as an individual replacement part, please note four screws may be required.

This brush ring is an OEM from DeWALT. Compatible with mostly saw devices, the plastic brush ring has been designed to secure carbon brushes. This component is fitted onto the magnet ring. A screwdriver and an Allen wrench are needed in the removal and repair. This part is sold individually.

This is a genuine OEM sourced replacement part that is intended to be used with reciprocating saws from DeWalt and Black & Decker. The metal clamp pin fits into the gear case. The pin is used to support the blade clamp assembly. This item is sold as an individual replacement part.

This connecting ball is an authentic manufacturer replacement part used in various power tools. It is a stainless-steel ball that provides a pivot point that allows the attached components to move back and forth smoothly during use. If the connecting ball falls off or becomes loose, worn out, or damaged, the equipment will become unstable or unable to move at all.

This authentic OEM slider is sourced from the original manufacturer for use in reciprocating saws. It has a width of approximately 1/3 inches and a length of 0.75 inches. The slider is a part of the drive system, and it moves back and forth, allowing the blade to cut through materials. The slider may wear down, or become dislodged over ti...Read moreme, leading to blade instability and inefficient cutting. Begin the repair by removing the saw battery or disconnecting it from the power source. Remove the saw casing and locate the slider in the gear case. Carefully remove the old slider and position the new one in its place. Ensure it is securely fitted and reassemble the equipment.

This is a genuine replacement part manufactured for use with power tools. The special screw is a versatile fastener used in several applications. The screw is sold individually, please see model diagram for part location and usage.