DC24A Norge Refrigerator - Parts

This capacitor (Refrigerator and Freezer Compressor Run Capacitor, Run Capacitor) provides the voltage or energy current required to start the compressor and keep it running. It allows the compressor in your appliance to easily cycle on and off. This capacitor mounts directly onto the compressor starting relay. If the capacitor is faulty ...Read morethe compressor may get unusually hot and draw excessive amperage. It the compressor overheats, it may fail to run until it cools down again. The compressor may also get noisy from overheating. If this part is totally electrically open, it is defective (often due to overheating) and needs to be replaced. The part measures 1 inch by 1-1/2 inches, and is constructed of plastic with two metal wire terminals. This item includes 1 capacitor, sold individually. This part comes in black.

This condenser fan motor kit is designed for use with refrigerators. This fan draws air through the condenser coils and over the compressor. It does this with the goal of cooling the warm refrigerant before it enters the evaporator. When your fan or fan motor is not working your refrigerator will not cool properly. This is a 2-Watt, 115 V...Read moreolt motor that rotates the fan in a counter clockwise direction. This kit includes the hardware needed for installation, and a set of instructions. Before you begin any repair work make sure to unplug your appliance.

Metallic screw that is less than an inch long. Does not include the plastic washer.

Sold individually.

This screw is sold individually.

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

This rivet is an inch and a half long. It is used for many washing machines, microwaves, refrigerators, dryers, and ranges. Use of this rivet requires a rivet tool.

This defrost evaporator and water collection pan is almost sixteen inches long. It is all black in color and it is made entirely of plastic.

When your GE gas range stops working, we've got you covered. Meet your ideal fix, the GE Power Line Cord. This isn't just any cord; it's specially designed for your GE gas range, promising a strong and secure connection to your power supply. That means getting your stove back up and running smoothly, almost like having a brand new applian...Read morece. Safety is paramount. Remember to always unplug your range before getting started with the installation. We suggest slipping on a pair of work gloves for enhanced safety to protect your hands during installation. This Power Line Cord is all about reliability and durability. Getting this small but crucial part replaced helps maximize your range's performance. No more disruptions while preparing your favorite dishes! With simple, understandable instructions, this replacement would be a breeze, boosting your confidence in restoring your appliance back to its best. Rekindle the love for your kitchen and cook without worry, knowing you're using a product that's compatible, designed, and recommended specifically for your GE gas range. Who knew a quick fix could bring so much satisfaction? It's the little things, like the GE Power Line Cord, that make your appliance?and your life?work like a charm.

Sold Individually.

The speed nut (also referred to as a condenser motor fan nut), fits onto the condenser fan motor. The motor for this fan turns on simultaneously with the evaporator and the compressor motors, so a malfunction in the condenser fan motor could cause your fridge to cycle on and off more frequently or run too warm, or too noisily. Make sure t...Read morehat the speed nut is properly attached and tight. Check the nut for any signs of wear or damage. If the nut is damaged and refuses to tighten, you should replace the part immediately. Remember to unplug your refrigerator before starting this repair.

This support is used with the crisper drawer shelf.