D7007LW419 General Electric Dryer - Parts

The selector knob is what you use to start the dryer. This replacement knob comes with a retaining clip. This is a very easy repair, the only tool you may need is a pair of needle nose pliers. Remove the existing knob by pulling it off, making sure to remove the retaining clip as well. Line up the new knob with the D-shaped shaft and slide it into place.

This rear drum bearing kit includes a shaft, ground strap, bearing, seven screws, and installation instructions. The bearing plate comes with a slot in it for the ground strap. This part helps keep your dryer running as smoothly as possible with as little noise as possible by supporting the back of the dryer drum and reducing friction as ...Read morethe drum rotates. Over time, your drum bearing will wear out, cause your dryer to be noisy, and you will have to replace it. There may be some sharp internal parts, so be sure to wear work gloves during repair.

This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on the door strike, and will not stay closed, you may need to replace the door latch. This part is square in shape, and is approximately 3/4-in...Read morech in length, by 3/4-inch in width. The part is made of white plastic with a metal tab. To access the door latch, you will need to remove the top and side panels on your dryer. To complete this repair, simply pop the damaged door latch out of position, and snap the new one into place.

TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the door will not lock properly and not only will this cause the door to swing open, but it won’t allow the dryer to start properly. It is a small piece of metal, about 1 inch in length and is sold individually.

Introducing the GE Idler Pulley Wheel, a crucial component for your dryer. This item is crafted from highly durable plastic, ensuring long lasting durability. The idler pulley wheel is responsible for maintaining the correct tension on the drive belt so that the drum can spin properly, ensuring your dryer operates smoothly. Safeguard your...Read more hands by wearing work gloves during installation and always remember to disconnect the power before starting. Trust this GE product to keep your dryer performing at peak efficiency!

There is a slot in it for a ground strap.

Screws NOT included.

Experience top-notch performance with GE's Drum Drive Belt. Specifically designed for dryers, this essential part attaches to the motor pulley, ensuring your dryer drum spins smoothly and efficiently as the motor rotates. Before beginning installation, it's recommended to unplug your dryer to ensure safety. Don't forget to wear work glove...Read mores to protect your hands while fitting this essential GE appliance part. Trust in the quality and reliability of this GE Drum Drive Belt for an optimal running dryer.

This screw is sold individually. Size: 10-16x1/2

Size - 8-18 ab