Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
N/A
1 personfound this instruction helpful.
Gerry from Mackay, ID
Really Easy
15 - 30 mins
Screw drivers
I followed the instructions provided.
Was this helpful?
Thank you for voting!
old burners, burning very uneven!
2 of 4 peoplefound this instruction helpful.
Robert from Falls City, NE
Really Easy
15 - 30 mins
Pulled out the old, plugged in the new
Was this helpful?
Thank you for voting!
Drip Pans were stained and burned on.
1 personfound this instruction helpful.
Sandra Collignon from SANTA CLAUS, IN
Really Easy
30 - 60 mins
Replaced drip pan. Notch did not want to match the burner notch. Was a close fit bit with a little pressure made it work.
Was this helpful?
Thank you for voting!
Three of four electric coils won't turn on
1 of 2 peoplefound this instruction helpful.
Arsenio from Beaverton, OR
Really Easy
30 - 60 mins
Pliers, Screw drivers
I took out the coils manually by pulling them out with slight pressure. Then I lift the hood by first unscrewing the four screws. I have never done anything like this before just intuitive sense to locate the screws that needed to be loosened. Afterwards I remember placing something underneath like a piece of 2x4 wood block to act as supp
... Read moreort to hold the hood open so I can work on the coils. The parts I got are exactly the same as those I am replacing so I just copied the connection and voila my electric range is working like new. Well of course before I touched anything, I made sure I turned off the main switch and that nobody switches it back on without my knowledge. Thanks for providing the parts, I just saved myself from buying a $600 electric range.
Read less
Was this helpful?
Thank you for voting!
The Problem Was That The Plug Was Gone It Fell Down Out Of The Bracket
1 of 2 peoplefound this instruction helpful.
Elnora from Brundidge, AL
Easy
15 - 30 mins
Screw drivers
I took the old wires and plug off and replaced it with the new block it works fine
Was this helpful?
Thank you for voting!
center piece of the heating element broke off
1 of 2 peoplefound this instruction helpful.
Elaine from Atascadero, CA
Really Easy
Less than 15 mins
so easy, just ordered the part, the part came and inserted the element into the stovetop
Was this helpful?
Thank you for voting!
Old burner pan warped.burner sat at 15 degree angle.
1 of 2 peoplefound this instruction helpful.
Michael from Portland, OR
Really Easy
Less than 15 mins
Removed burner and then burner pan.Then replaced pan and reinstalled burner.
Was this helpful?
Thank you for voting!
The radiant ring element had broken
1 of 2 peoplefound this instruction helpful.
Martin from Alexandria, VA
Really Easy
Less than 15 mins
Screw drivers
Removed old element, plugged in new one, tested ok
Was this helpful?
Thank you for voting!
Drip pans were old and with burnt on food that I couldn't get off. Disgusting!!
1 of 2 peoplefound this instruction helpful.
Nicki from ELSIE, NE
Very Easy
Less than 15 mins
No problem Took off old ones and replaced with new.
Was this helpful?
Thank you for voting!
Sockets burnt out.
1 of 2 peoplefound this instruction helpful.
James from Bear, DE
Really Easy
15 - 30 mins
Screw drivers
Repair was very east. The suppliers package had all of the necessary parts ceramic wire nuts wire Ect. Excellent. Will buy from Part Select Appliance again.
Was this helpful?
Thank you for voting!
drip-bowls wore out
1 of 2 peoplefound this instruction helpful.
Ronald E from Rochester, NY
Really Easy
Less than 15 mins
i read the installation instructions and followed them. first i made sure that each heating element was off. next i carefully removed each one (a total of 4) from it's plug and lifted the worn out drip-bowl up and replaced it with the new one. finally i pluged in (a total of 4) heating elements and turned them on to make sure them were wo
... Read morerking and they did.
Simple - needed to replace the drip pans on the stove between tenants in a rental apartment
1 of 2 peoplefound this instruction helpful.
Tama from Pacific Grove, CA
Really Easy
Less than 15 mins
This wasn't much of a repair -- rather a replacement of a simple abused part. At the same time, PartSelect allowed me to order what I needed after two failed attempts to buy replacements that would fit the range. I'll remember PartSelect if we need parts for other older appliances in the rental units.
Was this helpful?
Thank you for voting!
8 inch element not heating in cooktop
1 of 2 peoplefound this instruction helpful.
LouAnn from Maquoketa, IA
Really Easy
Less than 15 mins
I removed the old element. I then plugged the new element in place. Simple repair, no tools required. Turned the cooktop element on to test for proper functioning. It heated properly. Repair completed. Ordering the part was easy and it arrived within 2 days. Very happy with Parts Select service.
Was this helpful?
Thank you for voting!
Stove Burner wouldn't heat up
1 of 2 peoplefound this instruction helpful.
Donna from Sandwich, MA
Really Easy
Less than 15 mins
Someone did the repair for me.
Was this helpful?
Thank you for voting!
stove top burner would not heat
1 of 2 peoplefound this instruction helpful.
Marjorie from Indianapolis, IN
Really Easy
Less than 15 mins
new element plugged into burner connection- an easy fix
My Orders
