EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

CWS445RGS1 Gibson Washer - Instructions

All Instructions for the CWS445RGS1
91 - 105 of 192

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Hot water was not entering the machine, but cold water flowed smoothly
1 of 2 people found this instruction helpful.
  • Ronald from Saint Louis, MO
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers, Wrench set
1. Turned off water to washing machine.
2. Used plyers to disconnect the hoses at the back of the washer.
3. Unscrewed old inlet valve from back.
4. Opened top panel of washer and disconnected hose running to wash basin.
4. Lifted the old unit out and unplugged electrical wiring.
5. Reverse above and you're finis hed!
If you're reading this you can probably do the repair.
Saved myself $500+ on a new washing machine. Wife is happy.
Was this helpful?
Thank you for voting!
water over flowing, old valve stuck open.
1 of 2 people found this instruction helpful.
  • william from mayfield, NY
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Part came in, fast delivery. Took 10 minutes to install. Real easy works great.
Thanks PartSelect.
Was this helpful?
Thank you for voting!
hot water kept filling the tank
1 of 2 people found this instruction helpful.
  • Bob from Birdsboro, PA
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I followed the following instructions provided by the parts page and they were EXCELLENT! I had NO problems and was actually enjoyable to fix, thx. to these instructions listed below. Many thanks!!!! FIRST I REMOVED THE TOP PANEL HELD BY FOUR SCREWS AT REAR OF PANEL, PULLING THE PANEL FOWARD AND UP. THEN DISCONNEC TED THE POWER AND WATER CONNECTIONS. THEN I REMOVED THE TWO SCREWS HOLDING THE FLOW VALVE TO THE WASHER REAR PANEL,PULLED THE VALVE FOWARD ,REMOVED THE TWO ELECTRIC CONNECTORS, PINCHED THE WATER CLAMP WITH PLIERS AND REMOVED THE WATER CONNECTION TO THE VALVE. THEN REPLACED WITH THE NEW VALVE FOLLOWED THE ABOVE STEPS IN REVERSE ORDER, FINISHING UP BY RE PLACING THE WATER CONNECTIONS AND POWER. THEN CHECKED FO PROPER REPLACENENT AND LEAKS BEFORE REPLACING TOP PANEL
Was this helpful?
Thank you for voting!
the drain hose was leaking
1 of 2 people found this instruction helpful.
  • STEVEN from HAMPTON, GA
  • Really Easy
  • Less than 15 mins
  • Pliers
i took the hose of and stuck the water hose in it and saw a lin hole leak. i order a new hose and recived it very fast (1 day) took 15 min to put it on the pump and to put the machine back togther
Was this helpful?
Thank you for voting!
Drain pump froze during subzero temp
1 of 2 people found this instruction helpful.
  • Buford from LAWTON, OK
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
Just like the video said in the parts menu remove front of washer remove 2 screws remove 2 hose clamps replace pump replace 2 screws replace hoses and clamps and front door to washer done
Was this helpful?
Thank you for voting!
belt broke
6 of 17 people found this instruction helpful.
  • Dave from Murrieta, CA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Removed old belt. Installed new belt.
Was this helpful?
Thank you for voting!
motor burnt out
2 of 7 people found this instruction helpful.
  • ANNA from STATEN ISLAND, NY
  • Easy
  • 15 - 30 mins
  • Wrench set
my husband did the work he can fix anything.i watched he explained what he was doing and how he was getting it done.it did"nt take long at all.the biggest problem was setting the belt tensioner . its running great!!!!!!!!!!!!!!!!!!!!
Was this helpful?
Thank you for voting!
Cold water was filling slower than the hot water.
0 of 1 people found this instruction helpful.
  • Steve from Fort Mohave, AZ
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Pulled out the machine. Disconnected water lines. Removed four screws attaching the top brackets. In rear of top panel. Slid top panel forward and clear of valve. Removed two wire harnesses. Removed two screws holding valve to the back panel. Pulled valve down and out. Removed outlet side line spring clamp with channel lock pliers and pul led hose off old valve. Installed outlet side hose and spring clamp onto new valve. Placed valve up into place and installed two screws. Installed two wiring harnesses. Replaced top lid. Replaced lid bracket screws. Re-attached water hoses and pushed the machine back into place.
Was this helpful?
Thank you for voting!
broke hose
1 of 4 people found this instruction helpful.
  • jose angel from dalton, GA
  • Easy
  • 15 - 30 mins
  • Screw drivers
disconneted power removed two screws removed led the front clamp removed quiet hose remplace for new
Was this helpful?
Thank you for voting!
No cold water supply
0 of 1 people found this instruction helpful.
  • Harold from Kansas City, MO
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Removed two screws that held top of washer in place. removed top of washer. Removed two screws that held water inlet alve in place. Removed clamp and outlet hose from old inlet valve.