CV15-41521 Kohler Engine - Parts

This is an OEM part sourced directly from the manufacturer. The connector is commonly found in Kohler engines. This part is made of high-quality plastic, and is attached to the rectifier regulator to direct the path of wires that carry electrical signals. You may require a wrench when replacing this item. This product is available as an individual replacement part.

This OEM Oil Seal has an O.D. of 2 inches and is designed for use in over 150 models of small engines. It is made of durable black rubber, is not part of a kit or assembly, and is sold individually. It is found on the crankcase opening, where the crankshaft is. When this part is malfunctioning, you will notice leaking oil. If the Seal is...Read more worn or damaged, it will need to be replaced. You will need a screwdriver, pliers, a socket set, a wrench set, a nut driver, and an impact wrench to complete this repair. Customers rated the difficulty level of this repair as Expert.

This is a genuine Kohler replacement part that has been sourced from the original manufacturer to be used with small engines. The gasket is used to seal the connection between the carburetor, insulator, and heat shield. It is recommended to replace the gaskets when servicing the engine to make proper seals and connections when the parts are reassembled. This item is available as an individual replacement part.

This durable manufacturer-sourced part is made for use with Kohler engines commonly installed on lawn and garden equipment. It helps to distribute the pressure evenly and provide an air-tight seal for the air cleaner base. Over time it may wear out and begin to crack eventually requiring a replacement. For the exact location and the corre...Read morect application, please refer to the appropriate diagrams of your model. This high-quality part is made of durable composite material and is sold as an individual component. You will need a wrench set to remove and reattach the air cleaner base to perform this repair.

Sold individually, not as part of a kit or assembly, this Govener Pin is a direct replacement part on over 150 models of small engines. The Govener Pin attaches to the Govener Gear. Over time, it may become damaged or worn and need to be replaced. You may need pliers to complete this repair. Customers rate this repair as Easy.

Used to supply support for the Governer Gear, this Governer Gear Shaft is an authentic item supplied by the original manufacturer. The Shaft is made of silver-colored metal and is sold individually, not as part of a kit or assembly. This part needs to be replaced when it shows signs of damage, wear, or it can no longer support the Governor Gear. Customers rated this repair as Medium difficulty.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. This is an identical replacement for a missing or damaged valve spring cap, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. It is made of high-quality metal and is sold individually.

This is an OEM part sourced directly from the manufacturer. The fuel bowl retainer screw is commonly found in Kohler engines. This is a metal part, used to hold the fuel bowl in place in the carburetor assembly. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the c...Read moreorrect part. You will require a wrench when replacing this item. This part is sold individually.

Hose clamp. This clamp replaces 25 237 14-S

This is a genuine OEM sourced part which is made for use with Kohler engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a faulty breather hose that was installed on a new unit. The part allows the air in the tank, please make sure to refer to the appropriate diagrams of your model for ...Read morethe correct location and application of this component. This high-quality item is made of durable rubber and is sold individually. Keep in mind the hardware to secure it is sold separately.

This is a genuine OEM sourced part used on many small engines. The Kohler reed retainer is constructed of metal, and is designed to hold the breather reed. The reed retainer is sold individually. A wrench is necessary for the proper installation.