EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

CTX21BASRRWH Hotpoint Refrigerator - Instructions

All Instructions for the CTX21BASRRWH
16 - 30 of 47

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
My wife forced the fruit drawer in and snapped the slide rail.
1 person found this instruction helpful.
  • Mark from Keyport, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I pulled out the shelf and removed the 2 screws holding the broken side rail to the shelf frame. I then screwed the new rail in and set the shelf back in.
Was this helpful?
Thank you for voting!
original parts broken (poor design)
1 person found this instruction helpful.
  • WALTER from SPRING HILL, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Unscrewed four screws, two on each part, and replaced broken parts, reinserting screws. This is a no-brainer repair.
Was this helpful?
Thank you for voting!
broken slide rails
1 person found this instruction helpful.
  • Craig from Bothell, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Basically I removed 4 screws holding the rails together, did a little cleaning of the existing parts that I would re-use and screwed the 4 screws back in and put it back into the fridge. Piece of cake. If I hadn't cleaned up the old parts it would have taken me 5 minutes.
Was this helpful?
Thank you for voting!
needed to replace broken drawer slide rail,
1 person found this instruction helpful.
  • janette from huntingtown, MD
  • Really Easy
  • Less than 15 mins
  • Screw drivers
removed produce drawers, removed center piece front cover, removed glass shelf, removed broken drawer slide rail - unscrewing where attached in the rear of the refrigerator. Also removed screw from centerpiece where broken drawer slide rail was attached. reassembled all very quickly....saved myself having to buy another refrigerator by d oing this simple repair.
Was this helpful?
Thank you for voting!
The light inside the oven had burned out
3 of 7 people found this instruction helpful.
  • Catherine from SEATTLE, WA
  • Very Easy
  • Less than 15 mins
0. As a safety precaution, unplug the range or hit the relevant fuse breaker before you start. You might also want to grab a flashlight. Definitely do not try to do this while the oven is hot.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap. ... Read more />3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.

No tools needed, the cap is just held in place with pressure from the wire.
Was this helpful?
Thank you for voting!
I broke the left side slide rail while trying to clean out refridgerator
1 of 2 people found this instruction helpful.
  • Nikki from Raleigh, NC
  • Easy
  • Less than 15 mins
  • Screw drivers
I had one of my guy friends do it for me. It took him less than 10 minutes, and probably would have been quicker if he had a better screw driver. Mine is a cheap girly one that he could not get a good grip on.
Was this helpful?
Thank you for voting!
Drawer Slide Rails broken
1 of 2 people found this instruction helpful.
  • David from Wingate, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The bottom shelf of my Mom's fridge broke. I found the part I needed and went to repair it. Realized both sides were broken. Ordered other side as well. Two screws in front, two screws in back. Front side had a metal strip covering screws. Had to pull that off to get to screws. Snapped back on after repair.
Mother was very ple ased.
Told her to be careful. Those little pieces of plastic can be expensive.
Was this helpful?
Thank you for voting!
The vegie draw rack cover
2 of 5 people found this instruction helpful.
  • PHYLLIS from BRONX, NY
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Both side rails were busted. the parts were precise and it was extremely easy. Thanks again.
Was this helpful?
Thank you for voting!
Change bulb
3 of 8 people found this instruction helpful.
  • Louis from LEAGUE CITY, TX
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
Easy
Was this helpful?
Thank you for voting!
broken part
1 of 3 people found this instruction helpful.
  • Minky from New York, NY
  • Really Easy
  • Less than 15 mins
I ordered the part one day and it was in my refrigerator by the next day. No tools required. You guys are incredible. This is the second time I ordered parts from you. You never disappoint!!
Was this helpful?
Thank you for voting!
The slide rail for the vegetable drawer broke in a refrigerator that is at least 15 years old.
0 of 1 people found this instruction helpful.
  • ade from oceanside, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed the broken rail (2 screws), replaced the new rail (2 screws), reassembled all in about 8 minutes. It was AWESOME!!! I had spent hours trying to repair it and, fortunately, gave up and decided to look online for the part. Didn't even think that the part would still be available. Not only was it available but it arrived in 2 days ! Anything that is broken in the future: I am going to your website first! Thank you!!!
Was this helpful?
Thank you for voting!
slider cracked, so drawers wouldn't stay in
0 of 1 people found this instruction helpful.
  • shelli from gaithersburg, MD
  • Easy
  • 15 - 30 mins
  • Screw drivers
The entire frame that holds the two crisper drawers pulls right out. After that, it's just a matter of unscrewing the broken part, snapping in and screwing the new part and sliding the whole thing back in.
Was this helpful?
Thank you for voting!
The support for the vegetable drawer cracked
0 of 1 people found this instruction helpful.
  • Linda from Davis, CA
  • Really Easy
  • 15 - 30 mins
The repair was very simple. The longest part was taking everything off the shelf in the refrigerator so that the slide rail could be removed. Then when things were out, it was clear that the bottom of the refrigerator needed cleaning. The repair itself was done quickly. The cleaning (yuck) took longer! this is a great site because th e part came quickly and it was very easy to select just what was needed.
Was this helpful?
Thank you for voting!
drawer slide broken
0 of 1 people found this instruction helpful.
  • Linda from Bloomingdale, GA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Remove bottom glass shelf, lift up -then remove entire drawer slide assembly.Remove plastic decorative front cover(it just snaps off) and unscrew left side drawer slide screws.replace with new part and screw in screws. Replace in bottom of fridge and replace glass shelf.So Easy that an average house wife like myself was able to do it alon e.Almost as easy as finding the part needed on partselect.com! Thanks, it was much easier than apple pie.
Was this helpful?
Thank you for voting!
The Slide Rail was broken
0 of 1 people found this instruction helpful.
  • Max from Corvallis, OR
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
First i removed the vegetable drawers and slide rails. Removed two screws from the old rail then replaced it with the new one. Then replaced the vegetable drawers. It was that simple. The replaceement part was delivered to my home in threre days after i ordered it on line. It was better than going to a dealer and having them order one for me then having to make another trip to pick it up.
Was this helpful?
Thank you for voting!
All Instructions for the CTX21BASRRWH
16 - 30 of 47