My Orders
- Home
- CTD70DM2N3S5
- Instructions
CTD70DM2N3S5 General Electric Wall Oven - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven meat probe broken
3 of 3 people
found this instruction helpful.
-
robert from FAIRFIELD, OH
- Very Easy
- Less than 15 mins
This item worked as described. I paid more for this 'oem' probe than the generic 1 because i didn't want to chance it not working as others have reported.
- works great. tested it....snaps in, reads correctly, snaps out.
- works great. tested it....snaps in, reads correctly, snaps out.
Was this helpful?
Thank you for voting!
Fan motor not operating
2 of 2 people
found this instruction helpful.
-
John from HAVERTOWN, PA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers, Wrench set
Removed screws from front of oven, placed a table under oven 2” below, places two rollers on table and pulled out the oven. Removed screws, replaced fan and reassembled. Move into place and secured front. Cleared faults and worked perfectly.
Was this helpful?
Thank you for voting!
Temp probe was defective
1 person
found this instruction helpful.
-
Eric from SOUTHBURY, CT
- Very Easy
- Less than 15 mins
Threw the old one out - plugged the new one in. Steak came out just as ordered - medium rare.
Was this helpful?
Thank you for voting!
Went well.
2 of 6 people
found this instruction helpful.
-
Salih Hindas / from SPRNGFLD GDNS, NY
- Really Easy
- 15 - 30 mins
-
Screw drivers
Changed the Temperature Sensor as you suggested, but the problem of 40 minutes to reach a temperature of 375 degrees F. remained the same.
Was this helpful?
Thank you for voting!
Burnt out lamp bulb
5 of 15 people
found this instruction helpful.
-
Carl from MENIFEE, CA
- Really Easy
- Less than 15 mins
Remove oven light lens cover, remove the bulb and replace it with a new one.
Was this helpful?
Thank you for voting!
Broken Probe Sensor
0 of 1 people
found this instruction helpful.
-
Michael from Tucson, AZ
- Really Easy
- Less than 15 mins
Replaced it
Was this helpful?
Thank you for voting!
Oven Probe broke
-
Kathleen from Munt Laurel, NJ
- Really Easy
- Less than 15 mins
Ordered new probe
Was this helpful?
Thank you for voting!
missing meat thermistor
-
John R from Asheville, NC
- Really Easy
- Less than 15 mins
plug in thermistor when needed
Was this helpful?
Thank you for voting!