My Orders
- Home
- CTA13CGDRWH
- Instructions
CTA13CGDRWH Hotpoint Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
sticky switch
-
ANTHONY from NEW EGYPT, NJ
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
easy pry out, disconnect wiring, connect on new switch and press in switch.
Was this helpful?
Thank you for voting!
light switch quit working
-
David from Simpsonville, SC
- Easy
- Less than 15 mins
-
Screw drivers
removed the inside fridge electrical panel and swapped switches
Was this helpful?
Thank you for voting!
light would not stay on
-
Kenneth from Leavenworth, KS
- Easy
- Less than 15 mins
First I flipped breaker to off position for refigerator, Pulled down on socket and broke it free. Then took needle nose piars to pull wire and plug out from hole, so I could conect to new light socket then snaped it in place . Hardest part was getting wire and plug out of hole.
Was this helpful?
Thank you for voting!
failed light switch
-
Jules from Crowley, LA
- Easy
- Less than 15 mins
-
Pliers, Screw drivers
I started removing the switch by prying on the right side with a screwdriver, when it emerged enough I used pliers to finish removing it. I then unpluged rhe wires from the bad switch and pluged them on the new switch and "poped" it into the hole.
Was this helpful?
Thank you for voting!