My Orders
- Home
- CT9800SJ2SS
- Instructions
CT9800SJ2SS General Electric Microwave Oven Combo - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
When trying to run, intermittently, the light would come on but the tray wouldn't rotate or cook. When the door was open, the tray would intermittently rotate.
-
Sam from Chandler, AZ
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
I pulled out the unit and found 2 interlock switches that are depressed when the door closes. After cycling the door open/closed I found that one of the switches occasionally would stay depressed. The repair was easy (after I took off the panels so I could get to the switch) I simply removed 2 screws that attached the interlock switch a
... Read more
ssemblies to the main unit. Then I popped out the defective switch and popped in the new one. This did indeed fix my problem.
Read less
Was this helpful?
Thank you for voting!
Microwave would turn on ,BUT turn table would not turn and oven would not heat.
-
Earl from New Philidelphia, OH
- Easy
- 15 - 30 mins
-
Screw drivers
Took off cover , unpluged switches , took off switch assy, off/on test hooped and howlered for about 5 mins .Then laughed about other sites said could get those switches. Just wanted to say I LOVE Partselect. Super fast del , great price. JUST AWSOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Was this helpful?
Thank you for voting!
microwave just stopped working
-
James from Fall Branch, TN
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
First unplugged the microwave, took top grill off, took control panel off, took wires off and used color coded tape to make sure they went back in right places, took fuse out and replaced it and put every thing back and it all worked fine and to top it off my wife did it all. So it was pretty easy.
Was this helpful?
Thank you for voting!
Microwave would only heat food items to a warm condition
-
John from Tijeras, NM
- Really Easy
- 30 - 60 mins
-
Screw drivers
Removed microwave cover using screwdriver and anti tamper bit available at local hardware store. Megnetron had broken magnet making discovery of deffective part easy. Removed wire connector and three screws attaching magnetron to case, removed magnetron and installed new item in reverse order. Installed cover and made popcorn for operatio
... Read more
nal check of microwave. Happy days..........
Read less
Was this helpful?
Thank you for voting!
No heat on convection or bake. other functions operated fine
-
lyle from crosby, TX
- Easy
- 30 - 60 mins
-
Screw drivers
un plugged the oven. pulled the back cover off (3 screws). the heater terminations were there. removed heater wires. checked heater resistance with meter set on ohms reading was not correct. removed heater found a burned out place. installed new heater in reverse order of removal. works fine. If someone is a fare handy man this was a very
... Read more
simple task to do.
Read less
Was this helpful?
Thank you for voting!
Could not be turned on
-
Remer from Dothan, AL
- Really Easy
- 1- 2 hours
-
Screw drivers
Removed outer cover and then replaced the T. C. O. located on the left upper side if the unit. Replaced outer cover, tested oven. Oven operates normally.
Was this helpful?
Thank you for voting!
Door Interlock Switch Failed
-
Michael from Littleton, CO
- A Bit Difficult
- More than 2 hours
-
Pliers, Screw drivers
Removed cover, diagnosed problem, ordered part from Parts Select, received part in 2 days, replaced part, tested and replaced oven into built in space.
Was this helpful?
Thank you for voting!