My Orders
CSX22GJC Hotpoint Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The rail that holds the drawer cracked
-
Joyce from Bloomsburg, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
Just used a screw driver to remove the old part and install the new one. The gal on the phone from parts select was excellent helping me find the correct part. Highly recommend this web site.
Was this helpful?
Thank you for voting!
The door closing cam disintegrated and had to lift door to close it
-
Philip from Charlottesville, VA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Ther was a video on how to repalce this part on your web site. Describing what tools were needed saved me running back and forth to my tool box. I followed the directions given in the video and repair was completed in 1/2 hour. That included meremoving then cleaning and replacing the sheves in the door. And by the way, the part was sh
... Read more
ipped the same day I ordered it and arrived on my doorstep noon the following day.
Read less
Was this helpful?
Thank you for voting!
the cam broke because of weight and age
-
james from tryon, NC
- Really Easy
- 15 - 30 mins
-
Nutdriver
I watched the video on the webpage and did as he did. it was quick and easy. didn't realize the importance of this little part until it broke
Was this helpful?
Thank you for voting!
Plastic cams had worn out
-
Steve from Baytown, TX
- Really Easy
- 15 - 30 mins
-
Nutdriver, Socket set
Took the hinge of the top and lifted door of the bottom. Replaced cams and reinstalled
Was this helpful?
Thank you for voting!
Refrigerator door would not close completely.
-
Ronald from Reno, NV
- Really Easy
- 15 - 30 mins
-
Screw drivers, Wrench (Adjustable)
1. Watched the video on how to make the repair. 2. Used the tools recommended. 3. Followed easy instructions as demonstrated on video, and Viola! It was repaired.
Was this helpful?
Thank you for voting!
Door would not close properly at the last few inches, now it closes good at this time but now need to be raised up to the 5/8 inch as the book says, haven't done that yet
-
Carol J from Alexandria, KY
- Really Easy
- 15 - 30 mins
the door closing cam works fine.
Was this helpful?
Thank you for voting!
Refrigerator door didn't close without a big push.
-
Susan from Chevy Chase, MD
- Easy
- 15 - 30 mins
-
Screw drivers
Took door off. Replaced two cams at bottom of door, referencing those on the bottom of the freezer door. Also followed a video on the net. Worked like a jewel!
Was this helpful?
Thank you for voting!
door was not closing properly
-
Martin from Yakima, WA
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set, Wrench (Adjustable)
watched the video on changing the cam and then did the repair as per the instructions. the job was easy and now the door works as it should. that saved me lots of money by doing it myself. thanks, Martin.
Was this helpful?
Thank you for voting!
Door didn't shut cleaning, by itself
-
Jim from Wheaton, IL
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set
I watched the video online, and said, "hey, I can do that." And yep, I did. I'm pretty comfortable with handyman work - but had never tackled a frig door before. The door closing cam that had completely come apart turned out to be straight forward to fix with the replacement part.
Was this helpful?
Thank you for voting!
slides were broken and draws cracked
-
Paula from Boca Raton, FL
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers
Emptied the old draws and removed the old sliders. Took time to screw the new ones in. The draws are not as nice as the original ones.
Was this helpful?
Thank you for voting!