My Orders
- Home
- CSX22GAZBWW
- Instructions
CSX22GAZBWW Hotpoint Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator door would not close completely.
-
Ronald from Reno, NV
- Really Easy
- 15 - 30 mins
-
Screw drivers, Wrench (Adjustable)
1. Watched the video on how to make the repair. 2. Used the tools recommended. 3. Followed easy instructions as demonstrated on video, and Viola! It was repaired.
Was this helpful?
Thank you for voting!
Plastic cams had worn out
-
Steve from Baytown, TX
- Really Easy
- 15 - 30 mins
-
Nutdriver, Socket set
Took the hinge of the top and lifted door of the bottom. Replaced cams and reinstalled
Was this helpful?
Thank you for voting!
Door would not close properly at the last few inches, now it closes good at this time but now need to be raised up to the 5/8 inch as the book says, haven't done that yet
-
Carol J from Alexandria, KY
- Really Easy
- 15 - 30 mins
the door closing cam works fine.
Was this helpful?
Thank you for voting!
door was not closing properly
-
Martin from Yakima, WA
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set, Wrench (Adjustable)
watched the video on changing the cam and then did the repair as per the instructions. the job was easy and now the door works as it should. that saved me lots of money by doing it myself. thanks, Martin.
Was this helpful?
Thank you for voting!
Refrigerator door didn't close without a big push.
-
Susan from Chevy Chase, MD
- Easy
- 15 - 30 mins
-
Screw drivers
Took door off. Replaced two cams at bottom of door, referencing those on the bottom of the freezer door. Also followed a video on the net. Worked like a jewel!
Was this helpful?
Thank you for voting!
Door didn't shut cleaning, by itself
-
Jim from Wheaton, IL
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set
I watched the video online, and said, "hey, I can do that." And yep, I did. I'm pretty comfortable with handyman work - but had never tackled a frig door before. The door closing cam that had completely come apart turned out to be straight forward to fix with the replacement part.
Was this helpful?
Thank you for voting!