Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drawer slide rail broke in half
1 personfound this instruction helpful.
Ronald from Newnan, GA
Really Easy
Less than 15 mins
Screw drivers
First I removed glass shelf on top of rail. I then removed the two screws holding rail to refrigerator side. Next I installed new rail using same two screws. Finally I replaced glass shelf on top of rail.
Was this helpful?
Thank you for voting!
Cam riser washers broken
1 personfound this instruction helpful.
Richard from Waltham, MA
Easy
Less than 15 mins
Wrench set
Easy repair. No need to remove the door. Simply prop up the door with blocks or books - remove hinge and riser assembly - replace with new parts. Total repair time about 15 minutes. Tools needed only an open end wrench.
Was this helpful?
Thank you for voting!
Temperature controller freezing vegetables.
1 personfound this instruction helpful.
Cynthia from Hillsboro, TN
Very Easy
Less than 15 mins
I aligned the back of the controller with the slot in the icebox and it popped right back on. No more frozen vegetables.
Was this helpful?
Thank you for voting!
The light inside the oven had burned out
3 of 7 peoplefound this instruction helpful.
Catherine from SEATTLE, WA
Very Easy
Less than 15 mins
0. As a safety precaution, unplug the range or hit the relevant fuse breaker before you start. You might also want to grab a flashlight. Definitely do not try to do this while the oven is hot. 1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back. 2. Pop off the hemispherical glass cap.
... Read more />3. Unscrew the old light bulb, and screw the new light bulb in its place. 4. Put the cap back. 5. Secure the cap by putting the wire back in its slots on the cap.
No tools needed, the cap is just held in place with pressure from the wire.
Read less
Was this helpful?
Thank you for voting!
Bottom part was broken and the door would not close on it own.
1 personfound this instruction helpful.
Mark Andre from FREDERICKSBRG, VA
Very Easy
15 - 30 mins
Screw drivers, Wrench set
Followed the video on the computer. Was fixed in no time. Works great.
Was this helpful?
Thank you for voting!
Broken Drawer Slide
1 personfound this instruction helpful.
DEVON from NAPLES, FL
Really Easy
Less than 15 mins
Screw drivers
Removed 2 screws replaced new part very easy
Was this helpful?
Thank you for voting!
The plastic hinge stops broke.
2 of 4 peoplefound this instruction helpful.
james from olney, IL
Really Easy
15 - 30 mins
Screw drivers, Socket set
I cleaned out the door and removed the top hinge. Lifted the door and layed it on the floor. Removed bottom hinge from refridgerator installed new hinge. Replaced plastic stop on door. Used broke hinge to align it and tighten. Lifted door onto new hinge and installed top hinge. Instead of buying $35 dollar hinge buy 2 plastic stops. You
... Read more'll have to drill out a rivet on bottom hinge but it will save over $30.00.
Read less
Was this helpful?
Thank you for voting!
door not closing properly
1 personfound this instruction helpful.
Jon from Cordova, TN
Really Easy
15 - 30 mins
Nutdriver
I removed the top hinge by removing three screws, I then lifted the door off the bottem hinge and set it aside. I then removed the two screws holding the bottom hinge,removed it and installed the new part. I removed the broken part from the door by removing one screw-installed the new part and set the door in place and reinstalled the t
... Read moreop hinge. The door is now properly aligned and working like new. I spent as much time writing this as I did on the repair
Read less
Was this helpful?
Thank you for voting!
plastic cam risers on fresh food door worn out
1 personfound this instruction helpful.
Fred from Port St Lucie, FL
Really Easy
15 - 30 mins
Screw drivers, Socket set
I unloaded the door and took the cover off at the top of the upper hinge (1 phillips screw) I then unbolted the upper hinge (2-28mm bolts) and lifted the door off. I was surprised how light it was. I laid the door down and installed the new cam riser on the door. I then unbolted the lower hinge (2-28mm bolts)and installed the new hinge.
... Read morer />I lubed the 2 hinges with vaseline and put the door back on the lower hinge. I then reinstalled the upper hinge and cover. It took about 15 minutes, and a lot of that was cleaning up. Oh yes, to get at the lower hinge you have to pull off the lower grate that covers the coils. It just snaps off and on. It was a very easy job.
Read less
Was this helpful?
Thank you for voting!
Door Hinge Broken!
1 personfound this instruction helpful.
Clay from Columbus, OH
Really Easy
15 - 30 mins
Screw drivers, Socket set
After easily finding the lower hinge here through Google, I paid about $30 w/shipping and had the part in 2 days. My Hotpoint fridge was made in 1987, but it still runs well...why not fix the door?
Part repair couldn't be easier. No instructions needed...just empty the fridge door of food, remove top hinge, replace bottom hinge
... Read more and plastic bushing, and reverse order to button everything up.
PartSelect.com did a great job supplying a high-quality replacement hinge for my old fridge, and it's got a new lease on life now!
Read less
Was this helpful?
Thank you for voting!
Door wouldn't shut and 1 broken drawer slide
1 personfound this instruction helpful.
Matthew from Brighton, MI
Really Easy
15 - 30 mins
I removed the drawer and glass shelf, removed 2 screws and replaced with new drawer slide in reverse order. I removed the contents of the door, the top hinge, and then laid the door down. On the bottom of the door, I replaced the pivot piece (provided) and then I replaced the hinge on the lower right side of the refrigerator box (2 scre
... Read morews with a nut driver bit). I now reversed the order to re-assemble the door and finally re-aligned the top hinge to adjust the door fit. Less than 30 minutes total. EASY!
First I removed the drawers. Then I removed the 2 screws from each side. Then replaced the 2 pieces in the same manner using the same screws. It took about 15-20 min. Very easy. Drawers work perfectly now. Glad I found this site.
Emptied refrigerator door shelves. Supported door with 4x4 blocks.removed old door hinge and replaced with new.
1 personfound this instruction helpful.
John from Medford, OR
Easy
15 - 30 mins
Socket set
Emptied refrigerator door shelves. Supported door with 4x4 blocks. Removed old door hinge and replaced with new door hinge and cams. Pleased with end result and dealing with PartSelect.
Was this helpful?
Thank you for voting!
The food compartment door would not close completely.The botom door cams were worn.
1 personfound this instruction helpful.
Joseph from Pittsburgh, PA
Easy
15 - 30 mins
Socket set
I removed the door from the bottom hinge assembly by removing the top hinge assembly. 1. Installed the cam to the bottom of the door. 2. Installed hinge and bottom pin & cam to the refrigerator. 3. Reinstalled door and adjusted front roller height to make door close better.
Was this helpful?
Thank you for voting!
door would not close by itself - broke cam riser
1 personfound this instruction helpful.
Mike from Alpharetta, GA
Easy
15 - 30 mins
Nutdriver, Wrench (Adjustable)
My right door (food door on side-by-side) stopped closing - I found pieces of the plastic washer (cam riser) on the floor. After reading the stories on the web I decided to order the new part - and YES there are many universal parts that work for Kenmore/GE. The part comes with two parts (hinge and cam riser) - you should install both to
... Read more insure a good fit. I took 3 blocks of wood and a shim and supported the bottom center of the door, unscrewed the hinge off and dropped it out (3 minutes). The "only" tough part was unscrewing the cam riser from the bottom of the door - it required a very small socket and you will only have about 6-8 inches of work space. Be sure you have a socket that fits before you take the hinge off. The entire repair took less than 30 minutes and contrary to some of the posts, you DO NOT need to take the door off. Good as new again!
My Orders
