- Home
- CSK25GRYAAA
- Instructions
CSK25GRYAAA Hotpoint Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Again very simple to install. See below
0 of 2 people
found this instruction helpful.
-
Abraham from Weston, FL
- Really Easy
- Less than 15 mins
I can not find the bill therefore I do not know what part I installed, as I keep installing parts in my home. I believe you are referring to a Vegetable Bin of my GE Refrigerator and you do not have to be a rocket scientist to install a new one.
Sorry
Abraham Zighelboim
PS: I just saw that was the Veg Bean
Sorry
Abraham Zighelboim
PS: I just saw that was the Veg Bean
Was this helpful?
Thank you for voting!
The door recess asm would not seal tightly
0 of 3 people
found this instruction helpful.
-
Earl from Franklin, NC
- Easy
- 15 - 30 mins
-
Screw drivers
remove the 'pop-out " frame around the door recess, you pry the flexable seal from around the ice despenser, have someone hold the unit with the wiring, remove the one screw that holds the door recess, and replace the new one. reverse the procedure. remember to unplug thr frig. first
Was this helpful?
Thank you for voting!
Broken ice bucket
0 of 3 people
found this instruction helpful.
-
john from milford, CT
- Easy
- 15 - 30 mins
-
Screw drivers
Very easy to repair-Went online-Found diagrahm-Ordered part-and presto it was fixed.
Very good schematic to go by. If you can read you most likely can fix it.
Very good schematic to go by. If you can read you most likely can fix it.
Was this helpful?
Thank you for voting!
water tank was leaking
0 of 6 people
found this instruction helpful.
-
lawrence from new haven, KY
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
really simple,take 2 nuts loose pull the hose out and then replace.took less than 30 minutes
Was this helpful?
Thank you for voting!
ice dispenser frosting up
-
Rebecca from Banning, CA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Watched the video from your site and followed instructions, extremely easy after that.
Was this helpful?
Thank you for voting!
frost formed because the ice damper let warm air into the freezer
-
jon from social circle, GA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed frame, unscrewed the electrical panel, and popped the flapper off. Installed new flapper. Replaced the electrical panel and re-installed the frame.
Was this helpful?
Thank you for voting!
Flapper door mis-shapened
-
Ronald J from Seabrook, SC
- Really Easy
- 15 - 30 mins
-
Screw drivers
Took the paper clip, pressed in through the holes on the bottom of the ice dispenser panel. Removed the four screws. Loosened the panel and removed the wires. replaced the flapper door. Then reversed the process. Your video was VERY helpful except for the paper clip. Had to get that off another web site.
Was this helpful?
Thank you for voting!
Door flapper to ice needed to be changed
-
John from Ocean View, DE
- Really Easy
- 15 - 30 mins
-
Screw drivers
Repair went exactly like the video. With this video it was easy to make the repair. There were no surprises or problems and I felt confident in the videos instructions. It was like pushing the easy button.
Was this helpful?
Thank you for voting!
Misting inside freezer which blocked the ice dispenser.
-
Kenneth from Charlotte, NC
- Easy
- 15 - 30 mins
-
Screw drivers
I followed the video instructions to the letter and it was very easy and a total success. I believe I would have had problems but for thr video demonstration which was very clear and straight forward in a simple manner. Thanks for the prompt delivery of the part and the help installing it.
Was this helpful?
Thank you for voting!
Flap on door not closing and frost build up on dispenser
-
Kay from Lehigh Acres, FL
- Easy
- 15 - 30 mins
-
Screw drivers
Followed video. Changing flap was not difficult but did not fix the problem.
Was this helpful?
Thank you for voting!
Door ice dispenser flapper warped/frost build up
-
steven from westminster, MD
- Easy
- 15 - 30 mins
-
Screw drivers
I followed the repair video Partselect provided online. It the repair easy and fast. Great video!!!!
Was this helpful?
Thank you for voting!
Frost build up in ice maker
-
Christopher from Durham, NC
- Really Easy
- Less than 15 mins
-
Screw drivers
Watch online video on how to change icemaker flap! Video was great exactly how to do it, with a link to order the part
Was this helpful?
Thank you for voting!
Ice Dispenser Door Seal not sealing, frost in freezer
-
Thomas from Mooresville, NC
- Really Easy
- Less than 15 mins
-
Screw drivers
Googled how to replace the door seal, ordered parts and replaced the door seal flapper. The video on partselect was not correct for this GE model. However a simple diagran showed you simply remove the control panel directly (pops off) to provide access to the panel. Remove the 4 screws holding the panel, replace the door seal, and reas
... Read more
semble.
Read less
Was this helpful?
Thank you for voting!
Ice flapper replacement in freezer door
-
Chris from Houston, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
Looked at the instructional video and read previous customer comments. Didn't have to dissassemble rear of freezer door. Access through the front once trim ring and circuit board removed. Could not have done it with out the video/and or previous customer comments. Part was shipped and received immediately. Repairs complete! No more frost
... Read more
developing and plugging ice chute! I especially appreciate the customer comments on how to complete this repair!
Read less
Was this helpful?
Thank you for voting!
Rust in ice
-
James from Corpus Christi, TX
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Replaced auger and front helix kit.
Was this helpful?
Thank you for voting!