EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

CSG700 Maytag Cooktop - Instructions

All Instructions for the CSG700
46 - 60 of 82

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
All the burner caps had badly rusted; tip-off was the smell of gas.
0 of 1 people found this instruction helpful.
  • Kathryn Truax from Key West, FL
  • Really Easy
  • 15 - 30 mins
Our handyman took off the burner caps and checked after we reported smelling gas. We ordered the replacements here, and they arrived by only the 2nd business day, instead of 3-5 as expected. The only hard part was scouring off the rust, with SOS pads, from the stove top before putting on the new burner caps (a simple plug-in)!! This is very important to check on your stove; you could blow-up your house! The gas was escaping under the old burner cap, through the rusted-out portions.
Was this helpful?
Thank you for voting!
No spark at the burners
0 of 3 people found this instruction helpful.
  • Errol from Bay City, MI
  • Easy
  • 15 - 30 mins
  • Screw drivers
Replaced the ignition module with one from PartSelect. took care of the problem. They had the part in stock. Great service. Got the part in four days.
Was this helpful?
Thank you for voting!
turn on stove no spark to ignite the flame
0 of 3 people found this instruction helpful.
  • joseph from stratford, CT
  • Easy
  • 15 - 30 mins
I used the advise given in the website and it was very informative- the part was exactly where the folks on the website said it would be and although it wasnt the actual maytag part it was easily fitted by using the wire splices i mentioned and it was shipped quickly The whole process took less the 30 min once received. thank you for a v ery useful site.
Was this helpful?
Thank you for voting!
no spark
0 of 3 people found this instruction helpful.
  • Brian from Fort Washington, PA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Removed screws from back right of oven. Found spark module under right side panel of oven. Module connected in a slightly different way, so I had to drill a new hole and use a machine screw to secure it. All wires matched up exactly on new spark module. Replaced side panel, plugged it in and... SPARKS. Cheap and easy replacement and didn' t have to call Maytag for repair!
Was this helpful?
Thank you for voting!
It didn't spark fire
0 of 3 people found this instruction helpful.
  • Dmytro from Brooklyn, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the six wires. Then I repeated those steps in back order. That's it
Was this helpful?
Thank you for voting!
Burners would no longer work without using a match or lighter
3 of 13 people found this instruction helpful.
  • Mark from Hastings on Hudson, NY
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers
I replaced all the burner switches as well as the spark ignition module. It was necessary to solder small terminals to use the existing wires with the new spark ignition module. Otherwise, this was a pretty straightforward job. My wife, an excellent cook, is now even happier than usual.
Was this helpful?
Thank you for voting!
Missing regulator when floor model gas cooktop was purchased
  • Jerald from Loveland, OH
  • Easy
  • 1- 2 hours
  • Wrench (Adjustable), Wrench set
1. Apply gas pipe joint sealer to treaded nipple on bottom of cooktop; 2. Install regulator on nipple with regulator direction arrow pointing to top of cooktop; 3. Tighten but do not overtighten as it may crack the aluminum body regulator; 4. Make sure the face of the regulator with the green painted surface faces the outside of the cabin et; 5. Get a new gas flex hose to connect to gas pipe (got mine at Lowe's - 2 feet long with all the right fittings for about $15). 6. Follow instructions on gas flex hose - make sure you use gas pipe joint sealer only where indicated; 7. Turn gas shutoff valve back on and test for leaks using soapy water; 8. Turn on each cooktop burner to bleed out air.
Was this helpful?
Thank you for voting!
repair range burner
  • ZHENG from PINOLE, CA
  • Really Easy
  • 15 - 30 mins
  • Pliers
in and out in 15 min ,is easy when part fit.
Was this helpful?
Thank you for voting!
no ignition to burner head
  • Patricia from Forked River, NJ
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
ordered 2 burner heads- 1 at a time did not fix had to order a module-spark which solved the problem
Was this helpful?
Thank you for voting!
I replaced the four Drip Pans on our Cooktop.
  • Thomas from Lompoc, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
It was simple to remove the parts and then remove two screws and clean the area and re-assemble with the new drip pan. It was easier than I though it would be.
Was this helpful?
Thank you for voting!
the top broke away it was corroded
  • Thomas from Floral park, NY
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
use the pliers. to get. the remaining half off and the screwdriver to cleen the rest of the rust off
Was this helpful?
Thank you for voting!
Old Burner Head Caps No Longer Work And Need To Be Replaced
  • Stan from San Leandro, CA
  • Really Easy
  • Less than 15 mins
  • Pliers
The burner head caps on my Magic Chef no longer work and had to be replaced. I ordered 1 of the 4 caps to see how it would work out for me. I did not have any issues replace the cap. I contacted PartSelect and order the other 3 caps. The sales representative took my order and was EXTREMELY helpful. Now I know why all of my neighbors choose PartSelect. Including the cleaning, it did not take me more than 15 minutes. The video was also extremely helpful. Our Magic Chef should be good for another 6-8 years. Thanks PartSelect.
Was this helpful?
Thank you for voting!
Burners won't light up
  • Bhavni from Richmond, TX
  • Really Easy
  • Less than 15 mins
  • Pliers
We received the burners we ordered in timely manner, and it was very easy to install. Just unhook the old burners and drop the new ones in and connect.
Was this helpful?
Thank you for voting!
burner rusted flames coming out the side of the burner
  • Lewis from Tomahawk, KY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
turned the old burner to the left and lifted it out. unpluged the wires with a screwdriver pluged the wires into the new burner and putit back on the stove and turned it to the right
Was this helpful?
Thank you for voting!
the old had rust out and gas was sipping from the side
  • Corliss from Oakland, CA
  • Really Easy
  • Less than 15 mins
  • Pliers
I removed the old burner with pliers took off the electrodes. Replace the new burner attach the electrodes placed it back in the burner slot and now it works.
Was this helpful?
Thank you for voting!
All Instructions for the CSG700
46 - 60 of 82