EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

CSF24EMC Hotpoint Refrigerator - Instructions

All Instructions for the CSF24EMC
121 - 135 of 150

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
no ice
  • Richard from Las Cruces, NM
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Followed the video, very simple
Was this helpful?
Thank you for voting!
iCE MAKER LEAKING WATER
  • Roy H from Leesburg, VA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Followed the video demo and would have been done sooner but for limited work space- narrow freezer compartment and the release tabs on the electrical plug. First home repair that the air was not blue and got done in under time allocated.
Was this helpful?
Thank you for voting!
Noisy fan
  • Robert L. from Eldred, PA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Emptied freezes, turned off power, took floor of freezer out [4 screws ], took two screws out of fan mounts and replaces fan. Reassembled by reverse process. Simple
Was this helpful?
Thank you for voting!
ice maker very slow and arm that controls amount of ice sticking and quit making ice
  • Grimes from Bartlett, TN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
took 1 screw out and removed ice maker and slid new one in and replace screw and connected power cord
Was this helpful?
Thank you for voting!
ice maker was leaking water. Cubes were sticking inside tray.
  • Carl from Abilene, TX
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Reviewed video which was very helpful. Loosened two philips head screws, lifted up ice maker, unpluged power suppy and reinstalled. One of the easiest replacements ever!!
Was this helpful?
Thank you for voting!
Ice make stopped making ice
  • Carl from Broomfield, CO
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Went to GE website and researched the problem for the model, determined that it was 90% sure it was the Ice maker, I ordered it and it arrived the next day, installed it and it began working immediately,
Was this helpful?
Thank you for voting!
Ice Maker stopped working
  • William from San Tan Valley, AZ
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Took out one hex screw, disconnect electric couplings, pulled original ice maker out and found that the water supply line to the ice maker was frozen solid as well as the shute cup. Used hair dryer to thaw out the line and the cup reinstaled old ice maker and it worked fine. Did not have to use the new part at all at this time. Am keeping new part for future use.
Was this helpful?
Thank you for voting!
All Instructions for the CSF24EMC
121 - 135 of 150