EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

CSF24DAC Hotpoint Refrigerator - Instructions

All Instructions for the CSF24DAC
46 - 60 of 63

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
switch wouldn't come out anymore and turn light on
  • Cynthia from Seatac, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Gently pry out switch in door jam with screwdriver and pull both connectors off and put connectors on new switch then push switch back into the hole. Looked it up on the internet and video showed how to and also had link to new part, ordered and less than a week later the fridge is bright again. I have an older freezer also and it seems that they all use the same switches. Very Very easy
Was this helpful?
Thank you for voting!
old water valve was leaking at seam
  • Jerry from Grand Jct., CO
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers, Wrench (Adjustable)
pull refrig.from wall. Remove water lines and unplug elect.wires from valve. Remove the one screw that attached the valve to refrig.. To install new valve reverse procedure. push refrig. back into position. This was so easy.
Was this helpful?
Thank you for voting!
Heater not working caused the freezer to freeze up.
  • JOHN E from BRIDGEWATER, NJ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Took out old heater and put new one in. That was it.
Was this helpful?
Thank you for voting!
refig light did not work
  • paul from east hanover, NJ
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
per your instructions
Was this helpful?
Thank you for voting!
Noisy fan
  • Robert L. from Eldred, PA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Emptied freezes, turned off power, took floor of freezer out [4 screws ], took two screws out of fan mounts and replaces fan. Reassembled by reverse process. Simple
Was this helpful?
Thank you for voting!
evaporator fan wires separated and shorted out
  • Gary from Porter, ME
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
I removed the back of the refrigerator access panel disconnecte the 3 bolst holding the motor to the fan shroud assembly and removed the burned wires from the recepticle end at the wring harness. The fan motor comes with wire nuts but I chose to use the same style of connector as came with the OEM motor. I purchased the new connectors fro m NAPA and they are an exact fit. The new motor fit perfectly and has run flawlessly since the installation. It is in an awkward location and that takes time to get yourself into position but once there the assembly is very simple and it is rewarding to be able to use the appliance again. The ordering from the website and phone order are very easy to do and you have what you need in a timely and expeditious manner.
Was this helpful?
Thank you for voting!
Compressor fan bearing worn. Refrigerator was manufactured 9/78/
  • Edmund from Bethel Park, PA
  • Easy
  • 15 - 30 mins
  • Socket set
I followed the instructions verbatim as others explained. I did it step by step exactly as instructed, The timing was almost exact no more than 30 minutes. I removed the fan the night before the delivery of the new fan and used a small desk fan to cool the compressor. It worked fine in one half hour my freezer read a perfect zero. Tha nks for all the help
Was this helpful?
Thank you for voting!
All Instructions for the CSF24DAC
46 - 60 of 63