My Orders
- Home
- CSB9120SJ1SS
- Instructions
CSB9120SJ1SS General Electric Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Canopy Mica broke off piece that secures to the top of the micro
1 person
found this instruction helpful.
-
Kathy from SARASOTA, FL
- Very Easy
- Less than 15 mins
Slips in easily. Line up the tabs with the brackets and pop in.
Was this helpful?
Thank you for voting!
Bulb burnt out
1 person
found this instruction helpful.
-
DEBORAH from SUMMERTON, SC
- Very Easy
- Less than 15 mins
Followed instructions that came with bulb I ordered and could not have been easier. Will use this site again.
Was this helpful?
Thank you for voting!
Not heat
1 person
found this instruction helpful.
-
Kip from POWELL, OH
- Very Easy
- 15 - 30 mins
-
Screw drivers, Socket set
-unplug
-remove top and front covers
-unplug wire connectors from heating assembly
-remove heating assembly from metal stand and push out of the way
-remove metal stand from dry
-pull out heating assembly
-install new one in reserve order
-remove top and front covers
-unplug wire connectors from heating assembly
-remove heating assembly from metal stand and push out of the way
-remove metal stand from dry
-pull out heating assembly
-install new one in reserve order
Was this helpful?
Thank you for voting!
Burned out magnetron
1 person
found this instruction helpful.
-
Dewey from MADISON, AL
- Very Easy
- 15 - 30 mins
-
Screw drivers
Removed cover
Disconnected capacitor from old magnetron
Removed old magnetron
Installed new part
Connected capacitor
Reinstalled cover
Disconnected capacitor from old magnetron
Removed old magnetron
Installed new part
Connected capacitor
Reinstalled cover
Was this helpful?
Thank you for voting!
Microwave would not heat up
1 person
found this instruction helpful.
-
Suzanne from POWELL, OH
- Really Easy
- 15 - 30 mins
Part just snapped into place and wires were reattached.
Was this helpful?
Thank you for voting!
Door Switch went bad, Internal Fan would run every time you open the door
1 person
found this instruction helpful.
-
gilbert from TOMS RIVER, NJ
- Really Easy
- 15 - 30 mins
-
Screw drivers
Unscrewed the control panel (2 screws), lift up and let hang, with a plan screwdriver open bracket holding the switch, unplug 2 wires, replace with new switch, plug in the 2 wires, push switch back into bracket. Then slide on the control panel, put the 2 screws back. Easy fix.
Was this helpful?
Thank you for voting!
Thermostat quit.
1 of 2 people
found this instruction helpful.
-
Tony from ITHACA, MI
- Easy
- Less than 15 mins
-
Screw drivers
Checked all sensors with a multi-meter, found the thermostat to be the problem, no continuity.
Was this helpful?
Thank you for voting!
Replace bulb under microwave
2 of 5 people
found this instruction helpful.
-
Andrew from COLUMBIA, MD
- A Bit Difficult
- Less than 15 mins
-
Screw drivers
Part Select sent the wrong part I did not realize it until prong broke off one of the bulbs. They sent 130v instead of 120v. Return bulbs awaiting resolution.
Was this helpful?
Thank you for voting!
Microwave’s Halogen Light Bulb burned out.
1 of 3 people
found this instruction helpful.
-
PETER from NEW YORK, NY
- Really Easy
- 30 - 60 mins
-
Screw drivers
Our Microwave’s Halogen Light Bulb burned out.
We looked in our manual and were able to take the cover off to get to the bulb, but we were unable to unscrew the builb and the bulb in the manual did not match the size of the one you offer (size and part number were different)
We called 1-888-738-4871.
Gen ... Read more tleman who answered was very knowledgeable: answered all of our questions (PULL THE OLD BULB OUT) and assisted us by ordering replacement bulbs.
We (more importantly my wife) were very pleased with the result.
We looked in our manual and were able to take the cover off to get to the bulb, but we were unable to unscrew the builb and the bulb in the manual did not match the size of the one you offer (size and part number were different)
We called 1-888-738-4871.
Gen ... Read more tleman who answered was very knowledgeable: answered all of our questions (PULL THE OLD BULB OUT) and assisted us by ordering replacement bulbs.
We (more importantly my wife) were very pleased with the result.
Read less
Was this helpful?
Thank you for voting!
No heat.
0 of 1 people
found this instruction helpful.
-
Mack from Jacksonville, FL
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Replaced the fuse. Result; did not fix the problem.
Was this helpful?
Thank you for voting!
No heat
0 of 1 people
found this instruction helpful.
-
Edwin from New York, NY
- Really Easy
- 15 - 30 mins
-
Screw drivers
Replace the fuses
Was this helpful?
Thank you for voting!
Bulb burned out
2 of 7 people
found this instruction helpful.
-
Richard from SPRINGFIELD, MA
- Really Easy
- 15 - 30 mins
-
Screw drivers
change bulb
Was this helpful?
Thank you for voting!
no night light
4 of 14 people
found this instruction helpful.
-
CURTIS from WINDSOR, WI
- Really Easy
- Less than 15 mins
-
Screw drivers
took out cover by removing cover. pulled out light bulbs replaced with new bulbs. replaced cover and tighten screw. very easy
Was this helpful?
Thank you for voting!
circuit shortage shows, i thing it because i heat on the counter too long cause the thermotart not fumctional.
-
Rong from Portland, OR
- Really Easy
- Less than 15 mins
it work ok now
Was this helpful?
Thank you for voting!
Quit working
-
William from Socorro, NM
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Just like the directions said. Very simple.
Was this helpful?
Thank you for voting!