CS5105XWN0 Whirlpool Dryer - Parts

Sold Individually.

Shaft for dryer drum support roller. Rear shaft with left hand threads. Part is updated so nuts may need to be replaced as well on older dryers.

The blower shaft is 1-5/8 inches long, while the drive shaft is 1-1/4 inches long.

This front shaft with right hand threads is used in dryers. The shaft and the drum support rollers ride on to support the drum. If your shaft has flat spots and the rollers do not spin, replacing the shaft can solve the problem. The tools needed for this repair are: 5/16 inch socket or nut driver, 1/4 inch socket or nut driver, small flat...Read morehead screw driver, channel-lock pliers, 9/16 inch socket. Remember to unplug your appliance from the power source before beginning this installation project. Refer to the diagram provided by the manufacturer for further installation instructions.

This part seals between the blower housing and the blower housing cover.

Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.

Introducing the Whirlpool Dryer Idler Spring, a genuine OEM part designed for some models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef clothes dryers. This essential product functions to hold the idler pulley tight against the drum belt, enabling the belt to turn smoothly and efficiently. Specifically designed...Read more for the idler pulley arm in dryers, it ensures optimal performance of your appliance. Guaranteeing maximum durability and reliable performance, safety measures include unplugging your dryer before installation and wearing work gloves to protect your hands. Opt for the Whirlpool Dryer Idler Spring to maintain the effectiveness of your dryer. Please verify that this part is suitable for your model before ordering to counter any potential variations in size or shape.

This part is located on the drum roller support shaft in your dryer appliance. The exterior of the washer is 1 inch in diameter with a hole in the middle and is made of metal. They are installed alongside the drum support rollers and idler pulleys. If you notice that your dryer is making an unusual sound it could be due to the washer beco...Read moreming loose on the drum support. They help prevent the rollers and pulleys from bumping up against the brackets they are installed on. If you are replacing the rollers, we suggest you replace the washers at the same time.

Sold individually.

This lint chute seal, also known as a seal for outlet housing, is used for dryers. This part seals the lint chute to the blower housing in a dryer. It prevents air from leaking around the filter housing. If your seal is broken, damaged, or overused, it can allow lint to bypass the lint filter. In this case, replacing the seal can possibly...Read more solve the issues. The tool needed for this repair is a Phillips screwdriver. Refer to the manual provided by the manufacturer for further installation instructions and remember to unplug your dryer from the power source before beginning this repair project.

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

This screw is sold individually.