EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖
Sign In | Create Account
| Your Account

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos
Keep typing for more specific results...

Parts Departments

Top Model Types View All

Expert Repair Videos

Symptoms

Troubleshoot like a pro using your model's symptoms

View symptoms

Model Number Locator

Find your model number to unlock guaranteed fit

Find my model number

Articles & Guides

How to Fix a Samsung Dryer 3C Error Code - PartSelect

If a Samsung dryer is displaying a 3C error code, there is a communication issue with the motor and control board. In this article we’ll cover how to fix this issue.

How to Reset Your Bosch Dishwasher - PartSelect.com

A step-by-step guide to resetting a Bosch dishwasher. Learn what errors and issues a reset can fix, how to do a soft reset, and how to do a hard reset.

How to Fix an F11 Code on a Frigidaire Oven - PartSelect.com

Learn how to clear the F11 error code on your Frigidaire oven and replace the keypad overlay and electronic control board with our easy DIY how-to guide.

 See more articles & guides
  1. Home
  2. CS-750EVL
  3. Instructions

CS-750EVL Echo Chainsaw - Instructions

All Instructions for the CS-750EVL
1 - 1 of 1

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Saw would run with Fuel Sprayed into Carb. & quit, not pumping Fuel, Rebuild CRB.
2 of 3 people found this instruction helpful.
  • Gerald from Saratoga, WY
  • A Bit Difficult
  • More than 2 hours
  • Pliers, Screw drivers, Socket set
Problem was how to remove Carb. from a 37 year old chainsaw and not destroy Carb. Housing in the process. The John Deere 80EV chainsaw was made by Echo and was a CS750EVL model in 1978-1985. The Carb. is in a plastic housing with access holes for fuel line, choke rod, throttle linkage, high speed & low speed needle adjustments and Idle adjusting screw. After removing the obvious, the high and low speed needles were to long to clear the housing. Had to remove the rubber grommet seal that closes the stop of the plastic housing and gives access to the top slots in the high & low speed mixture adjustments. That is the "secret" in how to get to the carb. so you can rebuild.
The carb. rebuild is the easy part.
Read less
Was this helpful?
Thank you for voting!
All Instructions for the CS-750EVL
1 - 1 of 1