CP120W-C Jenn-Air Smoker - Parts

This surface burner switch, also known as an infinite switch, controls and regulates the heat output of the burners on a stovetop. The user simply adjusts the knob on the user interface panel, which in turn controls this switch. Made for various ranges, wall ovens and cooktops, this is a genuine OEM part that comes by itself, without any ...Read morehardware like screws or nuts. This burner switch is an electrical component that you also handle directly, so it can become faulty leading to problems like your stovetop not heating enough, overheating or staying at a fixed heat. This burner switch is a vital component for your stovetop and if it presents any of those issues, it needs to be replaced immediately. A screwdriver, set of pliers and wiring diagram will be needed for the replacement and installation process, and you will need to remove your appliance from the wall outlet first. Remove the knobs from the control panel and then gain access to the underneath portion of it with your screwdriver and disconnect the switch. Remove the wires from the burner switch with a set of pliers and disconnect the securing screws holding the switch in place. Now, you can install the new switch and reassemble the panel, being mindful of wiring each connector to the appropriate wire.

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

Before replacing a grill element, look for cracks, burn marks, or loose electrical contacts. Uneven heat or no heat can also come from a bad switch or damaged wire. Check the complete cooktop model because similar elements may have different plugs and power ratings. Shut off power at the breaker and confirm the cooktop is cool. Remove the...Read more grill grate, note how the old element connects, and fit the new one without bending its terminals. Reassemble all covers before turning the power back on.

This part is located over top of the blower in the center of the stove top.

This grommet is located under the fan switch.

This knob accepts a D-shaped shaft.

Sold individually.